👋
02-15-2024, 09:32 PM
#1
Teching In
Thread Starter
Join Date: Feb 2024
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
👋 What’s going on guys and gals.
wanted to know if any of u guys had a good opinion on my setup have a 6.0lq4 with ls3 heads milled to .030 Holley hi ram 102 tb 4c stall headers 4.56 gears back and front full e85 built 4L70 230/238 630 /615 lift and I was wondering what would be my next step to get more horsepower out of it with out going turbo on it
wanted to know if any of u guys had a good opinion on my setup have a 6.0lq4 with ls3 heads milled to .030 Holley hi ram 102 tb 4c stall headers 4.56 gears back and front full e85 built 4L70 230/238 630 /615 lift and I was wondering what would be my next step to get more horsepower out of it with out going turbo on it
02-19-2024, 06:47 PM
#2
Easiest would be nitrous. Next step ported heads. After that bigger cam. then more cubic inches or forced induction.
An engine is an air pump and will only move so much air (HP) at a given altitude unless you "Force" more air and fuel in with the above steps.
An engine is an air pump and will only move so much air (HP) at a given altitude unless you "Force" more air and fuel in with the above steps.