LS1TECH - Camaro and Firebird Forum Discussion - Search Results

Notices
 
Search: Posts Made By: RAMPANT
Showing results 1 to 25 of 451
Search took 0.67 seconds.
03-15-2019, 05:52 PM
Replies: 3
Views: 572
Posted By RAMPANT

I had the Firestones on my SRT8 and there were...

I had the Firestones on my SRT8 and there were quite good. Good grip in the rain and dry. I also had Nitto INVOs on the same car same size and would rate them comparable. A little more luxury...
02-14-2019, 11:34 AM
Replies: 179
Views: 32,573
Posted By RAMPANT

Let us know how it goes. I drew up the...

Let us know how it goes.

I drew up the adapter about a year ago, but have not bought a printer yet and not sure how strong the printed parts would be compared to the stock parts I modded.
02-10-2019, 08:37 PM
Replies: 179
Views: 32,573
Posted By RAMPANT

I did mine by fabbing adapters from the stock...

I did mine by fabbing adapters from the stock knobs. No glue and extremely tight. If you have Facebook here is a link.

https://www.facebook.com/groups/784738088283375/permalink/1441777229246121/
12-15-2018, 07:43 AM
Replies: 10
Views: 906
Posted By RAMPANT

Are you sure they are all 15". I do not recall...

Are you sure they are all 15". I do not recall them making 15s for the front at least. do the rear 15s fit over the stock brakes?
12-02-2018, 06:50 PM
Replies: 21
Views: 1,560
Posted By RAMPANT

Yokohama, AD08Rs.

Yokohama, AD08Rs.
12-01-2018, 09:55 PM
Replies: 21
Views: 1,560
Posted By RAMPANT

https://cimg5.ibsrv.net/gimg/ls1tech.com-vbulletin...

https://cimg5.ibsrv.net/gimg/ls1tech.com-vbulletin/2000x1124/22791786_10155550596310973_6778449594390478915_o_26b8a43ad2dded7c7f80a5b50d149fd372fe7da3.jpg
295 30 18s on 18 x 11s. 25" tall.
11-22-2018, 12:16 PM
Replies: 160
Views: 25,215
Posted By RAMPANT

I have the UMI/Strano shock with the Strano...

I have the UMI/Strano shock with the Strano adjustable shocks. I did a little bit of modification to make it all fit, but it did fit. Not sure if the stiffest setting would fit.

Hoosier rubbed a...
11-13-2018, 03:14 PM
Replies: 20
Views: 1,327
Posted By RAMPANT

Ok, Apparently I opened a car/can of worms or...

Ok, Apparently I opened a car/can of worms or vipers or something messy.

Thank you for your input. New transmission ordered.
11-12-2018, 04:23 PM
Replies: 20
Views: 1,327
Posted By RAMPANT

It is a T56 Magnum/4th Gen F Body hybrid. So the...

It is a T56 Magnum/4th Gen F Body hybrid. So the 4 bolt shifter fits, same location, same rear mount, but Magnum guts. The upgrades they call race prep are CF blockers and Bronze pads. I will opt for...
11-12-2018, 04:13 PM
Replies: 20
Views: 1,327
Posted By RAMPANT

You are correct. It is just CF blockers and...

You are correct. It is just CF blockers and bronze fork pads. I had this confirmed today. It is an Fbody hybrid that uses the 4 bolt shifter. I am only at 580-600rwhp NA.
11-11-2018, 08:04 PM
Replies: 20
Views: 1,327
Posted By RAMPANT

Thanks JDM. It is a new Magnum, converted...

Thanks JDM.

It is a new Magnum, converted with new parts by D&D to the F Body fitment. I was planning on adding their 900hp upgrade, but not sure what that includes. I will check with them.
...
11-07-2018, 03:39 PM
Replies: 20
Views: 1,327
Posted By RAMPANT

T56 Magnum opinions?

I plan to put a T56 Magnum in my Formula over the winter. 900hp option from D&D is likely my source and options.

Car makes 700fwhp and 663ft.lbs. or 580rwhp with 530rwtq.

I most do lapping,...
09-14-2018, 04:42 PM
Replies: 7
Views: 504
Posted By RAMPANT

They screw on like the stock ones. I used the...

They screw on like the stock ones. I used the stock ones as they seemed easier to put on.

Be careful as I broke one of the plastic posts they go on off at about 1/3rd its length. Smoothed the top...
07-30-2018, 08:01 PM
Replies: 5
Views: 247
Posted By RAMPANT

It should be fused though, right? I should be...

It should be fused though, right? I should be able to buy one of those inline fuses somewhere local. Incase of a short.
07-30-2018, 05:57 PM
Replies: 5
Views: 247
Posted By RAMPANT

So they just deleted a portion of the wire...

So they just deleted a portion of the wire harness? Nothing goes to the PCM? So I need to find that wiring path to reconnect it. Ugh, through the firewall again and pulling up carpets.

Might be...
07-30-2018, 08:39 AM
Replies: 5
Views: 247
Posted By RAMPANT

Reverse / Back up lights. Need pin out and schematic.

A long story short, my car uses Big Stuff 3 piggybacked on the stock computer. I bought a Speed Engineering adaptor harness to allow the stock computer to run stuff on the car. Security, ABS etc....
07-28-2018, 11:25 AM
Replies: 13
Views: 3,760
Posted By RAMPANT

Labour was about 20 minutes to 30 minutes per...

Labour was about 20 minutes to 30 minutes per knob once I had a method down. It held .003" on the square to get a good snug fit. No glue or anything required, and you can remove them after as well. I...
07-28-2018, 09:45 AM
Replies: 35
Views: 3,548
Posted By RAMPANT

Corbeau CR1s in leather. Corbeau F Body brackets,...

Corbeau CR1s in leather. Corbeau F Body brackets, but I had to mod the drivers side to lower it 3/4" to clear my helmet for track days. The air Lumbar makes them pretty good on long drives. I have a...
07-27-2018, 09:10 PM
Replies: 35
Views: 3,548
Posted By RAMPANT

Between the seats on the cross bar, so I have...

Between the seats on the cross bar, so I have good fast access from either side. Pull pin release....
07-27-2018, 03:03 PM
Replies: 13
Views: 3,760
Posted By RAMPANT

Seeing as I have designed things for most of my...

Seeing as I have designed things for most of my life and could not find a clear concise way people were doing these. I had a spare set of HVAC...
06-24-2018, 08:36 PM
Replies: 6
Views: 669
Posted By RAMPANT

Bends very little. I did see a Solstice that...

Bends very little.

I did see a Solstice that seemed to have it bent a little on the nose though.
06-19-2018, 09:08 PM
Replies: 6
Views: 669
Posted By RAMPANT

Mine was off the rear of a G6....

Mine was off the rear of a G6. https://cimg7.ibsrv.net/gimg/ls1tech.com-vbulletin/1316x640/34305390_10156119870940973_7680594336450347008_o_d62f684772bb64cf97cc1d8bed752e010ca89a0f.jpg...
06-03-2018, 02:40 PM
Replies: 26
Views: 4,175
Posted By RAMPANT

https://cimg2.ibsrv.net/gimg/ls1tech.com-vbulletin...

https://cimg2.ibsrv.net/gimg/ls1tech.com-vbulletin/1600x1066/img_3664_912948d9683df0adf9720e6d46269e200b608ee8.jpg...
05-29-2018, 07:13 PM
Replies: 6
Views: 587
Posted By RAMPANT

Here is a link with a couple pics....

Here is a link with a couple pics. https://1drv.ms/f/s!AiGN7xzHDq5vmyrwf9BMJe7NNGjd (https://1drv.ms/f/s!AiGN7xzHDq5vmyoGrM2pxZMieIJd)
05-29-2018, 07:04 PM
Replies: 6
Views: 587
Posted By RAMPANT

Yes they fit, but you need your weights on the...

Yes they fit, but you need your weights on the outside. Stick ons behind the spoke will hit the caliper. I have photos somewhere. I use the WS6 wheels for winter storage and they do fit. Your wheel...
Showing results 1 to 25 of 451
 


 
Forum Jump

About Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.