bank 1 o2 (50mv-950mv) - bank 2 o2 flatlined (430mv-450mv)?

Reply Subscribe

Thread Tools

Search this Thread

Oct 15, 2010 | 05:24 PM

#21

senicalj4579

Thread Starter

10 Second Club

iTrader: (41)

Joined: Jan 2006

Posts: 5,260

Likes: 24

Quote:

Originally Posted by lt1pwr1

If you are positive you have good connection/wiring then your pcm is probably shot.

Thats what my dad says but I have read these pcms rarely ever go bad. Also how can I tell its shot? Wouldnt other things in the car act up? ****!

Oct 16, 2010 | 03:19 PM

#22

DadsZ28

11 Second Club

iTrader: (1)

Joined: Oct 2005

Posts: 319

Likes: 2

From: deptford,new jersey

You wouldn't by chance be reading your o2s through an interceptor gauge by chance? Only reason I ask is that i had bank 2 on my gauge showing 445 and my readings came up as normal on bank 3 on my interceptor gauge.

Oct 16, 2010 | 04:38 PM

#23

senicalj4579

Thread Starter

10 Second Club

iTrader: (41)

Joined: Jan 2006

Posts: 5,260

Likes: 24

Quote:

Originally Posted by DadsZ28

Huh? Ummm Yea its an interceptor gauge. Dude for real? You have the same interceptor for same car?

Oct 16, 2010 | 04:50 PM

#24

senicalj4579

Thread Starter

10 Second Club

iTrader: (41)

Joined: Jan 2006

Posts: 5,260

Likes: 24

WTF! I went out just now and set it to bank ******* "3" AND its working fine. Im so happy and pissed at the same time.
Dude seriously THANK YOU for chiming in! I spent ALOT of time trying to figure this out. I tested wires all over the place,swaped the o2s side to side 4 times,cleared codes,I exchanged the o2s for new ones (under warranty),I was even gonna throw another pcm in the ****** thing. I feel so stupid! But I dont give a **** cause im happy HAHAHA!

Oct 16, 2010 | 05:47 PM

#25

DadsZ28

11 Second Club

iTrader: (1)

Joined: Oct 2005

Posts: 319

Likes: 2

From: deptford,new jersey

Wow that is a trip, what are the chances of that.....man for some reason after reading your post I wondered if that could be it. I'm so glad I could help ya. When I first put the gauge in I thought that was strange how it read like that, must be something in the way the interceptor reads the pcm. But cool now that ya know that nothing is wrong with your car.

Oct 16, 2010 | 06:45 PM

#26

senicalj4579

Thread Starter

10 Second Club

iTrader: (41)

Joined: Jan 2006

Posts: 5,260

Likes: 24

Yes big relief! You have to wonder...why would they put it as bank 3 and not 2? The real # for the bank is 2. If you look on the paper they send with the gauge it has all the things that can be done with it but look at it...it dosent list bank 3 or it dosent tell you to not use bank 2! But I did notice when I first got the gauge in the setup it had a bank 3. I thought that was for vehicles with 3 banks so I didnt think anything of it.
Seriously buddie thanks a ton!