Lt1junkie

iTrader: (9)

- F.A.S.T. Red/Black 92 MM W/ Fast fuel rails, AN fittings and Pressure gauge. Intake in very good condition ASKING: $980 WITH EVERTHING. OR $800 FOR JUST INTAKE ITSELF W/ BOLTS

-Comes with ARP Intake Manifold Bolts
- Custom Quick Disconnect Fuel fitting & black 6 AN feed line to Fast rails, Custom Black Nylon 8AN cross over fuel fittings w/ Russel 8ANx1/8NPT for Fuel pressure gauge thats included as well.

Will sell Fuel lines and rails separate for $225 including all fittings and pressure gauge

2. Trickflow Gen X 220's Cathedrals From TEA (Total Engine Airflow) all work performed BY TEA . ASKING $1700

- 2.04 Intake 1.57 Exhaust valves
- PAC .660 Dual valve springs
- Heads cleaned up, Set Spring heights, assembled seat pressure @160. installed height 1.800, coil bind 1.050, seal to retainer clearance .840 Also had these heads milled to 64cc
-3.90 bore LS1 casting but will work on 4.0 bore (which was my setup)

roth2000

Bronze or powder metal guides on the heads?

Lt1junkie

iTrader: (9)

Sorry heads just sold.

1badsilveradoss

iTrader: (1)

is TB and Rails still available