options to tensioner
#1
Launching!
Thread Starter
options to tensioner
going to be be using an alternator and water pump only but figure I'll need a tensioner on the passernge side to get enough belt wrap in the water pump. any ideas? I have a stock idler mounted in the pics but it's too big and will hit the lower radiator hose. It looks like it would hit the throttle body or upper hose if I moved it to the other water pump bolt.
#3
Launching!
Thread Starter
licked up a stock tensioner for an fbody from advanced auto and looks like it should work.
5.3, f-boy water pump with spacers to work with truck balancer and 145a alt.
now just gotta find the correct belt.
5.3, f-boy water pump with spacers to work with truck balancer and 145a alt.
now just gotta find the correct belt.
Last edited by sean byrd; 09-09-2017 at 01:10 PM.