When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
From: Jacksonville, FL (originally from Toronto Canada)
There is no underhood speaker or interior sensors for the factory alarm. The only sensors are for the openings (doors, etc.) and the shock sensor. The alarm works fine with the shock sensor disconnected.
There is no underhood speaker or interior sensors for the factory alarm. The only sensors are for the openings (doors, etc.) and the shock sensor. The alarm works fine with the shock sensor disconnected.
So, I arming the Theft Detterent on the chime 3 (factory settings) then lockout flashing and horn chirp on 5. But nothing...
I think I know why... Pin C8. I have the Europe export model. I guess the Theft Deterrent Relay is not wired to the BCM (but I have it behind the Radio Unit)
I'll try to connect the relay to the C8 and see what's happened. I wire the rear fog light in different way than the schematic few months ago
Last edited by Guillaume Malaquin; Sep 26, 2017 at 08:36 AM.
So, the C8 and D9 for the Rear fog lights was connected directly together (not through the BCM), 'cause the European BCM have the circuit but not the US BCM (I change it to have Key fob). And it's work.
I found a Relay behind the Radio Unit, but no wires was in the right color for the Deterrent Relay.. I try to connect every wire anyway to the C8 with a jumper for test. No one work. So I don't know what can I do... It seem to be the Blower relay
Maybe I just don't have the Theft Deterrent Relay. In europe there are Texalarm installed on it, but mine it was removed I guess (some wires was cutted, with sensor cables etc).
So, If I see right, C1 & C2 are ground. The A1 go to C8 of BCM and A2 (0.8 BRN) pins relay of Theft Systems go to the hazard??? It seem to not have connexion for European
Last edited by Guillaume Malaquin; Sep 26, 2017 at 04:11 PM.
From: Jacksonville, FL (originally from Toronto Canada)
If the factory alarm doesn't work then trying to get the arm/disarm notifications to work is probably pointless. In a normal installation, the alarm will arm and disarm regardless of whether the theft deterrent relay is present. The relay only provides separation between the alarm and the parking light circuit.
Try setting the Keyless Entry Verification options instead of the Theft Deterrent Verification and see if that works.
If the factory alarm doesn't work then trying to get the arm/disarm notifications to work is probably pointless. In a normal installation, the alarm will arm and disarm regardless of whether the theft deterrent relay is present. The relay only provides separation between the alarm and the parking light circuit.
Try setting the Keyless Entry Verification options instead of the Theft Deterrent Verification and see if that works.
Ok, so I connected a LED on C16 and the other lead with the ground on C1.
I checked everywhere, I don't have the Theft Relay.
And I checked the BCM connector, I don't have wire on D15 "Park Lamps Feed". So I guess I have everything on my car, just it's not wired because of Export conditions (Rear fog lights, european "Texalarm" alarm etc...)
I try to wire everything like it should and testing the relay with the Blower Relay. Stay tuned
LED on C16 : Work
Theft Relay : Work when I open my doors with arming theft it sound, crispy sound but sound, when I locked them, it sound, when I hit the panic button it sound. So the relay activate the system.
Horn Chirp : Don't work
Turn signal verification: Don't work
So, I really need a relay for working. C9 for Horns control are not wired, and I need to figure out where I need to wire the A2 from Relay Theft Deterrent
Last edited by Guillaume Malaquin; Sep 30, 2017 at 09:12 AM.
It seem to not have connexion for European
