FS: LS1 383 stroker rotating assembly/5.3 heads/Intake/Water Pump
FS: LS1 383 stroker rotating assembly/5.3 heads/Intake/Water Pump Selling stuff off my 383 stroker motor and some other misc. stuff from my garage
LS1 block with main caps (has a little smoothing in 2 bores i think) and has been bored 5 over - $200 OBO - SOLD
LS1 Water Pump (off of a 99 z28 with 80k miles) - $60 OBO
LS1 Thermostat - $10 OBO
LS1 Intake with EGR (egr is blocked off right now) - $60 OBO
5.3l Truck Heads (stock) with comp cams dual layer valve springs - $300 OBO
Eagle 4340 Forged 4.0" Crankshaft (needs a reluctor wheel - easy fix) - $550 OBO
Eagle 4340 H-beam Rods w/ ARP 8740 bolts 6.2" (can include the pistons for the right price 3-4 of them should be replaced however) - $300 OBO
2002 F-350 wheels has all for tires mounted but 2 of them will need replacing shortly (can get pics if need be but dnt have any ATM) - $250 OBO - SOLD
Gas Washer and Dryer not sure what brand they are a little older (both in good working condition the only thing wrong is if u put too big of a load in the washer then it leaks, should be an easy fix but my parents just decided to get new ones) - $100 OBO
S10 Xtreme front valance will fit 98 and up (has a little curb rash was on my old truck for about 3 months unpainted...) - $150 OBO - SOLD
S10 Xtreme Custom Bra - $75 OBO
S10 billet grille - $20 OBO - SOLD
PM me or reply in here with questions/offers
thanks
kyle
LS1 block with main caps (has a little smoothing in 2 bores i think) and has been bored 5 over - $200 OBO - SOLD
LS1 Water Pump (off of a 99 z28 with 80k miles) - $60 OBO
LS1 Thermostat - $10 OBO
LS1 Intake with EGR (egr is blocked off right now) - $60 OBO
5.3l Truck Heads (stock) with comp cams dual layer valve springs - $300 OBO
Eagle 4340 Forged 4.0" Crankshaft (needs a reluctor wheel - easy fix) - $550 OBO
Eagle 4340 H-beam Rods w/ ARP 8740 bolts 6.2" (can include the pistons for the right price 3-4 of them should be replaced however) - $300 OBO
2002 F-350 wheels has all for tires mounted but 2 of them will need replacing shortly (can get pics if need be but dnt have any ATM) - $250 OBO - SOLD
Gas Washer and Dryer not sure what brand they are a little older (both in good working condition the only thing wrong is if u put too big of a load in the washer then it leaks, should be an easy fix but my parents just decided to get new ones) - $100 OBO
S10 Xtreme front valance will fit 98 and up (has a little curb rash was on my old truck for about 3 months unpainted...) - $150 OBO - SOLD
S10 Xtreme Custom Bra - $75 OBO
S10 billet grille - $20 OBO - SOLD
PM me or reply in here with questions/offers
thanks
kyle
Originally Posted by juicedSS
how many miles is on the rotating assembly??
10k miles on the rotating assembly, before i had a lifter go which chewed up a couple of the pistons and the reluctor wheel.
Trending Topics
Originally Posted by Slicknic
Will the crank just need a reluctor and a polish? I'm kicking it around...
yep
can go $825 shipped (firm) on the crank and rods/pistons combo
heads need to go too
Originally Posted by Slicknic
I've got an LS1 engine that is selling this week, as soon I get the money and if you still have the crank and rods by then,
... they will be mine
... they will be mine
awesome just lmk
have another guy pending as well
bump ttt
