NX Gemini Twin Stage 6 perimeter spray plate kit. This kit is brand new and was only used for testing on the dyno. I had this on an Victor Jr intake with a sheet metal elbow on top of it. This setup made monster power!!! Comes with short braided lines from solenoids to plate, solenoids(labels are roughed up some from lines rubbing them), plate, standard jets 50 - 300 hp in 50hp increments PLUS 100 - 500hp jets from the Pro Plate kit. I'm also including gaskets, a 4 corner Edlebrock solenoid stand that mounts under the plate and a set of NX bottle brackets.

$275 shipped! Price is firm.

Pictured below is the plate flowing along with my second stage custom spray bars shown in the center.

 

arent there 2 solonoids missing ?

 

no i believe the 4 solenoid holder holds the other two noids for the spray bar which he isn't selling.

 

Redcobra is correct, there are not any solenoids missing. You can see the short supply lines, one red, one blue that are going to the plate are what hook up to the 2 solenoids.

 

to the top

 

i am pretty sure the twin stage plates come with 4 solonoids to make it an actual dual stage kit.
if it doesnt use 4 noids .. can u explain how it sprays two kits seperately?

 

You are referring to the Gemini Quad that is a 2 stage plate. This is a single stage plate and it comes with 2 solenoids. Thanks for looking.

 

To the top

 

still available?

 

if it fits a GMPP Carb Style... consider it SOLD!