Superman09

iTrader: (65)

Category: Engine - Power Adders
Price: $4750
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): MI
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine

I have (2) Twin Kit packages we can get you set-up with and save you some major bucks! These packages are not on the website so you will need to contact me through here or email at: jon@huronspeed.com to order.

I only have (1) of each so order yours while you can!

~~~~These packages are ADDITIONAL Savings beyond the current sale running on the base twin kits~~~~


Package 1: $4750 Shipped
(normally $5624) *$874 off*

-Includes-

*Our new V2 Stainless Steel, Vbanded, extra thick .120 wall Manifolds that retain the OEM Alternator location

* 2.5” extra thick .120 wall Stainless Up-Pipes, V-banded allow for easier installation with 44-46mm V-banded Wastegate ports and primary O2 sensor bungs. All piping stays ABOVE the oem sway bar!

* Pair of full 3" Stainless 2-piece downpipes routed through a Turbo Style K-member will supply the exhaust flow needed for 1500hp. Downpipes do NOT come with the recirculation ports as shown in the picture. Wastegates will dump.

*Standard 3.5" Thick Core intercooler with direct bolt on bracket, dual inlets and single outlet.

*Fully Polished 2.5" cold side piping from turbos to intercooler and 3.5" cold side piping from Intercooler to Throttle Body with a pair of 50mm BOV flanges.

*All necessary couplers and clamps included in this kit. Entire hotside consists of all v-band connections

*Stainless Steel Hex Head Bolt/Hardware Kit included!

*(2) Precision PT6266cea Billet Wheel, Journal bearing T4 Turbochargers

*(2) Precision PW46 Wastegates

*(2) XS-Power 50mm BOV's in Black

*(2) Black T4 Turbo Blankets





Package 2: $6250 Shipped
(normally $7174) *$924 off*

-Includes-

*Our new V2 Stainless Steel, Vbanded, extra thick .120 wall Manifolds that retain the OEM Alternator location

* 2.5” extra thick .120 wall Stainless Up-Pipes, V-banded allow for easier installation with 44-46mm V-banded Wastegate ports and primary O2 sensor bungs. All piping stays ABOVE the oem sway bar!

* Pair of full 3" Stainless 2-piece downpipes routed through a Turbo Style K-member will supply the exhaust flow needed for 1500hp. Downpipes do NOT come with the recirculation ports as shown in the picture. Wastegates will dump.

*UPGRADED BELL 4.5" Thick Core intercooler with direct bolt on bracket, dual inlets and single outlet.

*Fully Polished 2.5" cold side piping from turbos to intercooler and 3.5" cold side piping from Intercooler to Throttle Body with a pair of 50mm BOV flanges.

*All necessary couplers and clamps included in this kit. Entire hotside consists of all v-band connections

*Stainless Steel Hex Head Bolt/Hardware Kit included!

*(2) Precision PT6766cea Billet Wheel, Journal bearing T4 Turbochargers

*(2) Precision PW46 Wastegates

*(2) XS-Power 50mm BOV's in Black

*(2) Black T4 Turbo Blankets




To view the base form of these kits on our website for full information, check out this link:
[B][SIZE="3"]Complete Kit:http://shop.huronspeedproducts.com/H...it-hspv2tt.htm




*Kit requires: Stood up radiator with coolant hoses and fans to clear piping/turbo. A/C removal. Turbo Style K-member required if wanting to run the downpipes out the back. Can dump the downpipes up front with use of a factory K-member. Requires Oil lines as well to complete.



*Kit built around a pair of standard T4 Turbochargers with 3" V-band discharges such as: Turbonetics Hurricane Series (TC66-TC78), Turbonetics T-series (7575, 7875), Precision T4 w/ S trim or H trim covers (6262s through 7675s) Comp CT4s or CT43's with T4 housings (6062s through 8079s) and many many more.



*Kit RETAINS: OEM Alternator location, OEM Front Sway bar, OEM Power steering, OEM ABS.






















Few videos for your enjoyment as well!

sbcgenII

iTrader: (1)

If you could provide me with a time machine I will take one. This is a crazy deal. Did you post this in the FI Section?
Bump.