REDCYCLE13

iTrader: (7)

Category: Engine - Complete Motors
Price: $4000
Location (State): MS
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine

I have the complete longblock from a swap I did in a Foxbody Mustang. I ran this engine for 362 miles and around a dozen 1/4 mile passes. It was originally just a bottom end from an Escalade. I had the bottom end disassembled for inspection, then put back together with new stock pistons and rings, but without lower end bearings as they were in good shape. I bought new L92 heads and swapped the valve springs to dual springs in order to support the cam I chose (don't remember the specs, but I would say middle of the road aggressive). I had another car with a built engine and Haltech Elite ECU that was totaled, so I swapped engines, and that is the reason for the sale. This engine is complete from intake down, but will be shipped without the C5 corvette oil pan unless we work that part out. It has FAST 85lb injectors in the rails, and ARP head studs, along with a basically new Corvette water pump. I will include the already programmed E38 computer and stand alone wiring harness from PSI conversions for my asking price. I will ship at the buyers expense. $4000 for the entire package ready to run, call or text Ben for more info 225-445-2530

Parts Sold Individually
Longblock Engine $2900
ECU & Wiring Harness $400
Water Pump $100
C5 Oil Pan $175
Fast 85lb injectors $250
LS3 Intake $150
LS3 Fuel Rail $50

REDCYCLE13

iTrader: (7)

to the top

ZeroTraction

iTrader: (4)

How many miles are on the bearings?

REDCYCLE13

iTrader: (7)

I can't say for sure. I bought the engine about 4 years ago, and just don't remember if I even asked when I bought it. I can only say that the engine builder did not recommend replacement while it was apart, and it wasn't an issue of trying to skimp out.

Ive only put 362 miles on it.

TxFireman1972

iTrader: (8)

Did you ever sell this?