C5 Cupholders, Slave Cyl, LS Clutches, Flywheels, and C5 3.42 R&P.
05-01-2017, 11:58 AM
#1
C5 Cupholders, Slave Cyl, LS Clutches, Flywheels, and C5 3.42 R&P. Category: Drivetrain
Price: $100
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird
Location (State): NY
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
OEM GM 3.42 ring and pinion, silent operation, regular fluid changes, no damage to teeth. Never drag raced or launched. 115k miles. Only removed to go with 4.10s.
$200
C5 Storage Console Cup Holder. Mounts between the seats.
$50
18lb "Diamond" LS Flywheel, by Texas Drivetrain Performance. 40K miles, some heat spots, will probably need a resurface.
$100
"Diamond" LS Stage 2 Pressure plate, by Texas Drivetrain Performance. 40K miles, some heat spots, will probably need a resurface.
$100
2000 C5 LS1 Clutch slave cylinder, 115K miles, worked fine when removed.
$40
Clutch setup out of my 2000 C5, with approximately 50K on it (was replaced by the dealer at 50K or so). Tons of life left, never slipped, only removed because I installed an LS7 clutch for the track.
Flywheel has some heat marks but could be reused with resurfacing.
$60
Clutch disc has tons of life left.
$60
Pressure plate is in good shape, some heat marks
$60
a$160 for the LS1 flywheel, PP, and disc if you buy all together.
