2007 Chevrolet Tahoe with LS3
05-16-2017, 11:04 PM
#1
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Apr 2006
Location: Orlando
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
2007 Chevrolet Tahoe with LS3 Year: 2007
Make: Chevrolet
Model: Tahoe
Price: $22000
Mileage: 132000
Private or Dealer Listing: Private Listing
Location (State): NC
Color: White
Transmission: Automatic
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
Mileage 132,000 only 3,500 on all new drivetrain
Modifications:
LS3 6.2 Liter
Advanced Induction Stage 2 Ported and Polished Cylinder Heads
Comp Cams Mild Camshaft (Stock Torque Converter Friendly)
All upgraded Valve Train to accommodate Camshaft
Trunnion Upgrade on rocker arms to full roller bearing
Chome Moly Pushrods
LS7 Lifter
Melling High Volume Oil Pump
Engine made 460 RWHP and 458 RWTQ (525 HP Flywheel and 520 TQ Flywheel)
Put $5,000 in upgrades to engine not including the cost of the LS3 which goes for $6,000 on its own.
Transmission fully built by RPM Transmission in Indiana. Stage 5 with billet upgraded input and output shafts. $5,000 option
Fully Dyno tuned by PCM of NC in Mooresville, NC along with cam package was purchased through them. Passed NC Inspections also with the OBD Diag plug.
Upgraded HD Transmission Cooler custom CnC mounted to front for factory fitment.
Stainless Works Long Tube Headers with high flow cats cost $ 1850.00
Custom Made Exhaust with Magnaflow bullet muffler and long body muffler. All tig welded one off with all T304 Stainless pipe. No price on this its one off and is incredible workmanship.
Upgraded Driveshaft to handle the power. 4.5 inch Aluminum from PST driveshafts out of Tampa FL cost $600.00
Just rebuilt the rear differential with Yukon 3.73 gears and did new wheel bearings in the rear. The differential is silent cost $1400.00
Only ever run Joe Gibbs LS Racing oil in engine as well.
Truck is lowered with a Belltech lowering kit Spindles in the front, drop springs in the rear. To correct all the angles in the back I also installed a DJM lowering hardware kit so the geometry of the suspension is like factory. $1200.00 Kit was purchased through Tony at the TBSS store.
Installed all new Factory Autoride shocks from GM cost $2000.00 from the dealer for these along with a new air compressor for the rear shocks $498.00. Truck rides like brand new.
Brand new Toyo ST 2 tires. Only 2,000 miles on them. This was the reason I redid the suspension before I put the tires on.
Installed brand new GM Flex Fuel/ Fuel Pump Module
Interior:
Fully dynomated the vehicle to include all the doors inside and outside skins. Did this just to make 0 road Nosie.
Has full stereo all Audison Hertz in the entire truck. Also has a Bitone audio processor fully tuned to vehicle. JL Stealth box under center console with a 10W3 in it. Spent big money on this set up cost $3,900.00
Replaced the infamous cracking dash with brand new GM unit as well.
Has rear DVD Entertainment Factory along with Factory Navigation and Remote Start. Also has powered rear hatch and just replaced all the struts for the rear hatch as well.
Exterior:
Custom Painted bow ties front and rear along with blacked out painted grill.
Painted door handles and mirror caps to math truck.
Brand new Headlamps along with HID lights low and high beam.
Mirimoto Foglamps from Retrofit source as well.
Custom Reverse lights along with LED’s through out the truck.
The truck needs nothing and is ready to drive anywhere. Clean title. Truck is in Fayetteville, NC. Willing to assist with delivery for interested parties. Please ask if you have any questions.
Asking $22,000
Last edited by thecamarokid; 05-17-2017 at 09:55 AM.
