Procharged 2000 Camaro SS
05-15-2017, 09:17 PM
#1
Teching In
Thread Starter
Join Date: Dec 2016
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Procharged 2000 Camaro SS Year: 2000
Make: Chevrolet
Model: Camaro
Price: $17000
Mileage: 52000
Private or Dealer Listing: Private Listing
Location (State): FL
Color: Red
Transmission: Automatic
Drivetrain: Rear Wheel Drive
Engine (Less Than 5,000 miles):
• 383ci
• 11:1 compression
• LS1 Block w/3.905 bore
• JE Flat top pistons w/4cc valve relieves
• Manley 6.125 H-Beam connection rods
• Total seal zero gap second ring package
• Callies 4" stroke crankshaft
• Melling high volume oil Pump
• Brute Speed Blower Cam (Dur @ .050 232 int 240 exh/ .595 int .608 exh/ Lobe Sep 115.0)
• New GM Timing Chain and gears
• LPE Ported Cylinder Heads (2.02/1.60 valve with TI retainers and dual Valve springs)
• 7.400 Hardened Push Rods
• Crane Cams hydrolic roller lifter
• GM gaskets
• ARP Head & Main studs
• Drilled and pinned crank shaft for ATI Damper
• LS6 Intake
• LS2 Water Pump
• Be-Cool Aluminum Racing Radiator (PN:60028)
• 9 inch Spal puller Fan
• 16 inch Spal puller fan
• 160 Amp High Output Alternator
Exhaust:
• Pacesetter 1 ¾" long tube headers
• Off-road y-pipe
• Flowmaster catback
Fuel System (Less than 500 Miles):
• Lonnies Double Pumper return style system
• -8 Supply & -6 Return lines, fuel rails, regulator, hobbs switch
• Twin in-tank Walbro 255s
• Siemens EV1 Long Style 80lb injectors
• Alky Control Meth Kit
SuperCharger
• Rebuilt D1SC with less than 500 miles
• Twin 3.5 intercoolers
• ATI Red Race Valve
• Aster Bracket
• 3.4" blower Pulley, 7.65 Crank Pulley
Transmission (Less than 1,500 Miles) :
• 4L80e
• Trans Go HD2 Shift Kit
• New Clutches and seals
• Kelvar wide Band
• B&M Trans Cooler
• JW 2800 Stall Convertor
• Custom Steel Drive Shaft
Rear End (Less than 1,500 Miles):
• Stock 10 bolt 3.08 gear
Suspension/ Misc.
• Edelbrock lower Control Arms
• Edelbrock Torque Arm
• Sub Frame connectors (forgot the brand)
• Strut tower brace
• Russel Stainless Brake line for front and rear
• Corvette C5 brakes
• Power slot rotors
Clean Florida title two owner car. Can provide carfax if needed. Best pull the car made was 703rwhp @ 5400rpm and that was before the big fuel system was put on. Car is currently tuned for 630rwhp. Unfortunately I never have the time to drive it so I'm considering selling. this car sits on a battery tender in the garage, never out side. I have receipts for almost every single modification done to the car. The mileage on the body is 51,250.
This is very clean well built 4th gen. Yes I know it needs a better rear end for the current power, but aside from the rear end its pretty complete.
Im open to offers.
Call or text: 386-366-4470 Bryar
• 383ci
• 11:1 compression
• LS1 Block w/3.905 bore
• JE Flat top pistons w/4cc valve relieves
• Manley 6.125 H-Beam connection rods
• Total seal zero gap second ring package
• Callies 4" stroke crankshaft
• Melling high volume oil Pump
• Brute Speed Blower Cam (Dur @ .050 232 int 240 exh/ .595 int .608 exh/ Lobe Sep 115.0)
• New GM Timing Chain and gears
• LPE Ported Cylinder Heads (2.02/1.60 valve with TI retainers and dual Valve springs)
• 7.400 Hardened Push Rods
• Crane Cams hydrolic roller lifter
• GM gaskets
• ARP Head & Main studs
• Drilled and pinned crank shaft for ATI Damper
• LS6 Intake
• LS2 Water Pump
• Be-Cool Aluminum Racing Radiator (PN:60028)
• 9 inch Spal puller Fan
• 16 inch Spal puller fan
• 160 Amp High Output Alternator
Exhaust:
• Pacesetter 1 ¾" long tube headers
• Off-road y-pipe
• Flowmaster catback
Fuel System (Less than 500 Miles):
• Lonnies Double Pumper return style system
• -8 Supply & -6 Return lines, fuel rails, regulator, hobbs switch
• Twin in-tank Walbro 255s
• Siemens EV1 Long Style 80lb injectors
• Alky Control Meth Kit
SuperCharger
• Rebuilt D1SC with less than 500 miles
• Twin 3.5 intercoolers
• ATI Red Race Valve
• Aster Bracket
• 3.4" blower Pulley, 7.65 Crank Pulley
Transmission (Less than 1,500 Miles) :
• 4L80e
• Trans Go HD2 Shift Kit
• New Clutches and seals
• Kelvar wide Band
• B&M Trans Cooler
• JW 2800 Stall Convertor
• Custom Steel Drive Shaft
Rear End (Less than 1,500 Miles):
• Stock 10 bolt 3.08 gear
Suspension/ Misc.
• Edelbrock lower Control Arms
• Edelbrock Torque Arm
• Sub Frame connectors (forgot the brand)
• Strut tower brace
• Russel Stainless Brake line for front and rear
• Corvette C5 brakes
• Power slot rotors
Clean Florida title two owner car. Can provide carfax if needed. Best pull the car made was 703rwhp @ 5400rpm and that was before the big fuel system was put on. Car is currently tuned for 630rwhp. Unfortunately I never have the time to drive it so I'm considering selling. this car sits on a battery tender in the garage, never out side. I have receipts for almost every single modification done to the car. The mileage on the body is 51,250.
This is very clean well built 4th gen. Yes I know it needs a better rear end for the current power, but aside from the rear end its pretty complete.
Im open to offers.
Call or text: 386-366-4470 Bryar
Last edited by DominoEffect383; 05-26-2018 at 03:25 PM. Reason: Open to offers
