Negative Trader Feedback Disputes| Fraud Reports | Scam Warnings

SSPerformance screwed me over !!!

Old 04-29-2017, 08:36 AM
  #1  
8 Second Club
Thread Starter
iTrader: (41)
 
Firehawk441's Avatar
 
Join Date: May 2005
Posts: 2,119
Likes: 0
Received 12 Likes on 9 Posts

Default SSPerformance screwed me over !!!

I would've never expected being screwed on this purchase but it happened.
It took well over a year to bring me to this write up but my patience has expired.

Below is a link to the For Sale add:
https://ls1tech.com/forums/parts-cla...ver-built.html

I purchased what was supposed to be a short block from SSPerformance.
It was to be assembled by MCP Competition Engines and paid for by SSPerformance.
At the time of purchase it was not assembled and was to be at a later date. (This was agreed upon by both of us)

I bought the block, crank, rods, pistons, lifters, camshaft, tunnel ram.
At the time of assembly, SSPerformance was to pay MCP for assembly which was to include rod/main bearings and rings.

I went over the parts that were left at MCP and there were no lifters.
I contacted SSPerformance about this.
He did nothing to resolve the issue.
Shortly after, SSPerformance would not answer Calls, PM's, etc.
He also had my phone number blocked.

SSPerformance screwed me on the costs of bearings, rings, assembly costs.
I NEVER EVEN RECEIVED THE LIFTERS I PAID FOR
The aluminum connecting rods didn't fit inside this block with a 4.25" stroke as well and was told by builder they never will.

I absorbed quite a bit of added costs to get this shortblock built thanks to SSPerformance

BUYER BEWARE
HIS WORD IS WORTHLESS
Old 04-29-2017, 10:28 AM
  #2  
8 Second Club
Thread Starter
iTrader: (41)
 
Firehawk441's Avatar
 
Join Date: May 2005
Posts: 2,119
Likes: 0
Received 12 Likes on 9 Posts

Default

Originally Posted by SSPerformance
Up for sale is one of the baddest nitrous motors ever built , Only reason I'm selling this is to scale back the car alittle bit I DO NOT NEED THE MONEY SO NO LOW BALL OFFERS heres a run down
All machine work done by Charlie Weston
Built by MCP
RHS Tall deck block
460CI
Jessel Belt Drive
Jessel .937 Keyed lifters
Jessel Rockers
60mm Cam
Jessel Push rods
Callies magnum 4.250 crank
MGP alum rods
Diamond custom pistons 14.0 to 1
AVAID Dry sump
MOZEZ HEADS
MAST dual 4500 tb intake
(2) Wilson 4500 tbs
MAST billet valve covers


Only thing you need is your own fogger , I'm sure i missed some thing if i did feel free to pm me. Keep in mind if you go to have this motor built any were its a 50k $ piece
Original For Sale Add


Thread Tools
Search this Thread
Quick Reply: SSPerformance screwed me over !!!



All times are GMT -5. The time now is 01:42 PM.