mzoomora

iTrader: (36)

Clearing out some space. If you're interested in anything, email me at my user name @gmail.com. I'll be checking this from time to time as well.

QA1 Fs. One has a leak, the adjusting nuts are chewed up but the proper wrench still works on them. Would be good to have rebuilt to Rs.
SOLD

Corvette LS2 fuel rail covers
SOLD

Stock 853 heads with 918 springs. Prefer not to ship. If you want them shipped, you cover the cost.
$75

Pioneer DEH-P77dh Fits in stock location and has wire harness as well. Also has a remote. Old school for sure, but works and fits perfect.
$50

Torquer V3 cam. 231/234, .643/.598 lift, 114
$300

BTR cam. 231/248 .617/.595 111+4
$300

SLP bowtie grill. Good driver quality, will need the mounting hardware. I used poly anchors and screws, which were very secure. Has not been cleaned for the picture, excuse the bug juice.
$300

10 bolt rear, 3.90 gear, torsen diff. No backing plates or brakes. Has highway whine, but not terribly bad. Was very reliable, just changed when I went to procharger.
$100 PICK UP ONLY

ACCEL 36# injectors. One is missing the plastic cap on the tip.
$40

Fast toys lid for 85mm MAF sensor, 85mm MAF sensor. Perfect condition, just switched to speed density.
SOLD

Draglites. 15*10 and 15*4. 275/50 MT DRs in the rear, metric radials in the front. Tires are old, but have tread. Should be replaced. They have washer marks on the wheels, caps are kinda rough, lugs are old. These are driver quality wheels. The clean up nice though! Prefer not to ship, if you want them shipped, you cover the cost.
$350

Monsoon amp. $40

LCA relocation brackets. Need 2 bolts and nuts.
SOLD

QA1 315# F body springs.
SOLD

FTRA Upper part only.
$80

Powerbond underdrive pulley. I'm including the belts *I think* were used with it.
$100

TPIZ92

iTrader: (10)

Pics of the accel injectors

allblackedout5

iTrader: (18)

Interested in Lid and MAF setup...send some pics please.

danny_6725

iTrader: (10)

still have the throttle body?

low2001gmc

iTrader: (148)

Pic of Pioneer Deck please texted to Rob (956) 802 7700.

mzoomora

iTrader: (36)

I'll try to get pics up tomorrow. Everything is as described.

Dirtballin

iTrader: (4)

what is the back spacing ? Thanks

mzoomora

iTrader: (36)

Whatever they use on 4th Gen Camaros. 5-1/2"? They were on my 99 Camaro. Obviously you need to grind the calipers with these.

I just checked. 7-1/2 backspacing. These fit on my 99 Camaro.

danny_6725

iTrader: (10)

Interested in the throttle body. Do you still have it?

danny_6725

iTrader: (10)

would you be interested in selling the two fronts only? im also interested in the throttle body.

mzoomora

iTrader: (36)

I do. I'll get a picture up tomorrow. Was on the car when I bought it, hasn't been used in a while. I would say it has under 50k miles on it

mzoomora

iTrader: (36)

No, can't split them up unless someone wants the other two

danny_6725

iTrader: (10)

Okay let me know if someone inquiries about the rear wheels. You can also text me some pics of the throttle body if that's easier. 203-645-9505

mzoomora

iTrader: (36)

danny_6725

iTrader: (10)

Let me know about the throttle body bud.. looking to make payment today if possible..

No sticking right? Also, how is the adjustment screw.. not stuck or anything right?

mzoomora

iTrader: (36)

​​​​​​
I have to dig that out, I should get to it later today. It was perfectly fine though. I'll let you know when I get it out

danny_6725

iTrader: (10)

Hey any update on throttle body?

txh0tb0i972

iTrader: (63)

Does BTR Cam come with cam card?

Very interested in it.

mzoomora

iTrader: (36)

No cam card. This was in an engine I bought, just not right for my setup. Was told it only has break in time

mzoomora

iTrader: (36)