Custom shifter plate: B&M Pro Ratchet in factory console..
12-21-2014, 06:53 AM
#1
Custom shifter plate: B&M Pro Ratchet in factory console.. Category: Interior
Price: $65
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): TN
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6, LT1/LT4, Small Block, Big Block
LS Engine?: Fits LS Engine
If you prefer a ratchet shifter, this one is bad ***. I will probably be swapping my car to one very soon. I didn't get this one finished until late last night. Will update thread later with better pics and pics of what needs to be done to the console. Do not ask for pics of plate, I'll only send them once money is received. PM or text is fine, 865-399-9624.
Shown with T handle:
12-21-2014, 08:47 PM
#2
I've had several questions today on this setup:
No, the shifter IS NOT included.
I will have more picture posted tomorrow night showing the notches in the console. There is 3 total. The notch towards the cup holder is not necessary. I run a quarter stick shifter and I had to do it for the longer throw. Can easily be done with a dremel or even a cut off wheel. I can have the shifter installed in about 3 minutes.
It will work with 93-02 F body cars.
No, the shifter IS NOT included.
I will have more picture posted tomorrow night showing the notches in the console. There is 3 total. The notch towards the cup holder is not necessary. I run a quarter stick shifter and I had to do it for the longer throw. Can easily be done with a dremel or even a cut off wheel. I can have the shifter installed in about 3 minutes.
It will work with 93-02 F body cars.
12-22-2014, 12:05 PM
#3
On The Tree
iTrader: (5)
Join Date: Jan 2011
Location: J-Ville Fl
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
I'm very interested in the plate, will work perfect with the full manual set up I'm going for. Especially the clean factory look
QUOTE=JustAFooL;18583573]I've had several questions today on this setup:
No, the shifter IS NOT included.
I will have more picture posted tomorrow night showing the notches in the console. There is 3 total. The notch towards the cup holder is not necessary. I run a quarter stick shifter and I had to do it for the longer throw. Can easily be done with a dremel or even a cut off wheel. I can have the shifter installed in about 3 minutes.
It will work with 93-02 F body cars.[/QUOTE]
QUOTE=JustAFooL;18583573]I've had several questions today on this setup:
No, the shifter IS NOT included.
I will have more picture posted tomorrow night showing the notches in the console. There is 3 total. The notch towards the cup holder is not necessary. I run a quarter stick shifter and I had to do it for the longer throw. Can easily be done with a dremel or even a cut off wheel. I can have the shifter installed in about 3 minutes.
It will work with 93-02 F body cars.[/QUOTE]
Trending Topics
01-11-2015, 06:32 PM
#12
Thanks for the kind words David. Thanks even more for giving me the opportunity to build the plate around your shifter! You guys should check out this fellas build thread. He's putting a old school big block in a TA. Definitely so,e wicked stuff
