H/C/I 1998 Camaro Z/28
#1
11 Second Club
Thread Starter
iTrader: (7)
Join Date: May 2008
Location: Saline,MI
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
H/C/I 1998 Camaro Z/28
Year: 1998
Make: Chevrolet
Model: Camaro
Price: $14000
Mileage: 98000
Private or Dealer Listing: Private Listing
Location (State): MI
Color: Red
Transmission: Automatic
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
$15,000 O.B.O.
Car has 98,XXX miles
Car made 407hp/378lbs-torque on dyno, have dyno sheet.
Will include flash drive with most recent tunes for HP tuners
Also have receipts for most of the upgrades and parts
Call,text, or PM 734-845-0075
Engine-
-Factory 1998 LS1 Block, Crank, Rods, and Pistons
-Katech Rod Bolts
-LS2 Timing Set
-Melling high volume oil pump
-Custom Futral motorsports cam 234/238 .641"/.612" 112+4LSA ground by Cam motion
-LS6 243 TEA Stage 2 heads
-ARP Head Studs
-LS7 Lifters
-Trend Pushrods
-LS1 rockers with Comp Cam Trunion upgrade
-LS6 Intake
-Ported throttle body by the Powder Pro
-Racetronix 42# injectors
-Walbro 255LPH fuel pump with Hotwire kit
-SLP Airlid, Cold Air intake, and smooth air bellow
-NGK TR-55 plugs
-MSD wires
-Mike Norris Motorsports oil catch can
-ATI Dampener
Transmission/Driveline-
-TCI Flexplate
-FTI SRLS 3800 9.5" Stall Convertor
-TCI Deep Trans Pan
-Built 4L60E Transmission have receipts for internals
-Trans-Go Shift kit
-Driveshaft shop 3 1/2" Aluminum Driveshaft
-Moser 9" Rearend 3.75 motive gears with 31 spline axles, wavetrac diff, aluminum center Section with Daytona pinion bearing
Exhaust-
-Pacesetter Long tube Headers
-Texas Speed Y-pipe
-SLP loudmouth 2 Y-pipe back
Chassis/Suspension-
-UMI K-Member
-Protheane Motor Mounts
-UMI Lower A-arms
-UMI 3-point Subframe Connectors
-UMI Single Adjustable Lower Control Arms
-UMI Short Torque Arm with Driveshaft Loop
-UMI Single Adjustable Panhard Rod
-Slotted rotors
-Hawk HPS Pads
-New front wheel Bearings last fall
-ABS deleted with wilwood proportioning valve
Wheels/Tires-
-Weld RTS S71 wheel 15x10 Rear, 15x4 Front, wheel are powdercoated anthracite grey
-275/60/15 Mickey Thompson Drag Radials
-26x7.50x15 8PLY Mickey Thompson sportsman front runners
Electronics-
-PLX wideband with mounted gauge and set up to data log on HP tuners
-Lingenfelter LNC-2000 2-step Launch controller
Interior-
-Interior is stock except for radio and one gauge
-Have brand new front floor mats for it.
Last edited by Chubbz155; 08-17-2017 at 06:49 PM.