LS NASCAR Parts
10-18-2016, 02:29 PM
#1
LS NASCAR Parts Category: Engine - Intake/Fuel
Price: $1
Location (State): FL
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
PSI valve springs. Springs only $100 per set. Make an offer!!
Lunati Rods: $700 per set.Sold
LS7 lifters: $75 per set.1 set left
Lifter trays: $25 per set of 4. SOLD
Main studs- ARP: $100 per set. SOLD
Head bolts-ARP: $100 per set. Sold
DelWest Titanium valves: $250 per set (8 intake/8 exhaust)
Still have some Wegner ported NASCAR Spec bare heads left $750 obo
1 set fully assembled with DelWest Ti valves $1100 0bo
LS2 blocks- good shape with main caps $650
1 set JE pistons left. Std bore $250
Make offers. Need to clear this out!!
You pay shipping on most items
Last edited by sbwrench; 01-07-2017 at 01:58 PM. Reason: parts sold
Trending Topics
10-20-2016, 02:31 PM
#13
I'm in Daytona Beach. Thanks everybody that bought stuff. It has all been shipped and you should all have been pm'd tracking numbers. Still have springs, lifters, holders available. Can't believe no one has jumped on the ARP head bolts yet.I might have some nice heads and JE pistons on the shelf as well!
10-20-2016, 05:21 PM
#15
Everything I have is used NASCAR stuff. When they freshen the spec engines for the K&N and Whelan series engines I end up with a lot of the stuff they don't want to reuse. Some of it only has dyno time on it and some of it a race.I cycle most of it through the machine shop to check specs and it gets sold "as is". Most of it is way over kill for street use from a strength view point.These engines make 625hp at 7200rpm with a stock LS2 6.0 block at 10.5 to 1. They run Wegner ported spec heads with Ti valves, stock rockers with trunion kit, LS7 lifters, JE pistons, Lunati rods and cranks, a spec cam from Comp and a dry sump oil system with an 830 Holley and a distributor.
If you can find new Lunati signature series rods for $700 you better grab them. They retail for around $1500 a set!
If you can find new Lunati signature series rods for $700 you better grab them. They retail for around $1500 a set!
10-21-2016, 07:40 AM
#18
I have standard bore pistons (6.0l) 3.9936. I also have a couple sets of .005 over. They are JE part #245188. They come with rings and pins but usually missing 8 pin clips as they get either bent on removal or thrown away. $275 per set. They come in at 10.5/1 with 64cc chamber.
Part numbers for rods are posted on the spec sheet in the pics I posted as are all the dimensions. Sorry no part number on head bolts. Just standard LS ARP 6.0 head bolts.
Part numbers for rods are posted on the spec sheet in the pics I posted as are all the dimensions. Sorry no part number on head bolts. Just standard LS ARP 6.0 head bolts.
