L92, LS3, LSA and LS9 low mile cyl heads
02-06-2011, 03:31 PM
#81
Teching In
iTrader: (3)
Join Date: Feb 2009
Location: League City, Tx
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Category: Engine - Intake/Fuel
Price: $585
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): WI
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine
02-10-2011, 08:18 AM
#86
Currently available> Feb 11 ---ready to go:
LS7 intake complete -$425
*Heads assembled complete, including, valves, springs,seals, retainers and rockers:
*LS7 #451 -$1150
*L92 #364 -$495
*L92 #823 as new takeoffs -$595
*LS2 # 243 yellow springs- $425
*LS2 # 243 silver springs $385
* LS2 #799 silver springs, as new takeoffs 2 sets $375 each
LS2 & LS7 LS3 TB DBW TB -$200
Fedex $42/heads-- $ 22/intake
* 1set LS3 # 821- $595 Sold
Bruce@PowrMax.com
LS7 intake complete -$425
*Heads assembled complete, including, valves, springs,seals, retainers and rockers:
*LS7 #451 -$1150
*L92 #364 -$495
*L92 #823 as new takeoffs -$595
*LS2 # 243 yellow springs- $425
*LS2 # 243 silver springs $385
* LS2 #799 silver springs, as new takeoffs 2 sets $375 each
LS2 & LS7 LS3 TB DBW TB -$200
Fedex $42/heads-- $ 22/intake
* 1set LS3 # 821- $595 Sold
Bruce@PowrMax.com
Last edited by See5; 02-12-2011 at 03:13 PM.
02-10-2011, 11:06 AM
#87
Teching In
Join Date: May 2006
Location: Raeford, NC
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Bruce,
I was considering a pair of LS3 (821) heads, but not sure what the difference between the LS3, LS7, and LS9 heads are. Besides the valves (lightweight, sodium filled, and size), and ports, what are the other differences? I know the LS9 heads have different bolt sizes and are higher quality aluminum but will they work on the LS2/LS3 block? And how different are the flow numbers? Also, If I'm correct the LS7 heads will only work woth the LS7 or LSX bottom end, correct? Thanks, Erick
I was considering a pair of LS3 (821) heads, but not sure what the difference between the LS3, LS7, and LS9 heads are. Besides the valves (lightweight, sodium filled, and size), and ports, what are the other differences? I know the LS9 heads have different bolt sizes and are higher quality aluminum but will they work on the LS2/LS3 block? And how different are the flow numbers? Also, If I'm correct the LS7 heads will only work woth the LS7 or LSX bottom end, correct? Thanks, Erick
Last edited by erick_e; 02-10-2011 at 12:12 PM.
02-15-2011, 02:53 AM
#91
Teching In
Join Date: May 2006
Location: Raeford, NC
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Bruce,
I was considering a pair of LS3 (821) heads, but not sure what the difference between the LS3, LS7, and LS9 heads are. Besides the valves (lightweight, sodium filled, and size), and ports, what are the other differences? I know the LS9 heads have different bolt sizes and are higher quality aluminum but will they work on the LS2/LS3 block? And how different are the flow numbers? Also, If I'm correct the LS7 heads will only work woth the LS7 or LSX bottom end, correct? Thanks, Erick
I was considering a pair of LS3 (821) heads, but not sure what the difference between the LS3, LS7, and LS9 heads are. Besides the valves (lightweight, sodium filled, and size), and ports, what are the other differences? I know the LS9 heads have different bolt sizes and are higher quality aluminum but will they work on the LS2/LS3 block? And how different are the flow numbers? Also, If I'm correct the LS7 heads will only work woth the LS7 or LSX bottom end, correct? Thanks, Erick
Please let me know when you some LS9 heads available.
Thanks.
02-15-2011, 06:00 AM
#92
