Most of the parts have been sold off of the car with the exception of a few. I have sold a lot of parts to Tech members and none of them have been disappointed, see sold list below. The parts are all lite-used at best and in absolutely great condition.

Motor
5.3 with hand ported 243 heads (gen vi - LY5) 38k mile (2k since mods) pulled from an 09’ Silverado. ARP head studs, ARP rod bolts, stock truck accessories, LS9 head gaskets, Dual valve springs, Speed inc TU1.5 cam, performance products intake, LQ9 pan, vacuum canister, LS2 style coils, Katech timing chain, melling oil pump, LS7 lifters, LS2 trays, Moroso wires. $4,000

4L80E crossmember $100

Fuel
17 gallon fuel cell with working sending unit. Fuel feed/supply fittings added to bottom of tank. Had this mounted in stock location with slight mods, used stock filler neck (P/N RCI-2172AD/RCI-7515A) - $150 this is the only item that I will not ship

Magnafuel 625 Pump - $300

Brakes
SLP Line Lock Solenoid $40

Turbo Misc
Innovate LC-1 Wide Band O2 with Turbo Timer (P/N 3833) $80

Body/Misc Parts
Monsoon Radio (Pontiac) - $25
150mph White Faced Cluster (122k Odometer) $40

Guages – 2 1/16” Autometer Phantom
Water Temp $30 (electric)
Boost $30 (mechanical)
Fuel Pressure $30 (mechanical)
Fuel Level $30 (electric)
Oil Temp $30 (electric)
(3) Gauge “A” Pillar Pod $20
2 1/16” AC vent gauge adapter $10 each or 3 for 20

SOLD PARTS

Stock F-Body M-6 Petals and Crossmember - SOLD
Fuel Rails with fitting Sold
aeromotive boost reference regulator with lines and fittings Sold
Braided feed and return lines w/ (2) inline filters Sold
80# Injectors Sold
M6 stock f-body harness (un-cut) Sold
Lingenfelter TRG-002 58x-24x conversion box Sold
Quick Time Steel Bellhousing (C191LS) Sold
T-56 Mag 2.97 w/hydraulics (BA76-2.97) Sold
168T Billet Flywheel -Sold
McLeod 26T RST clutch -Sold
Kore-3 Front Brake Kit (P/N 6LE-218) Sold
Rear - Dana S-60 Sold
Turbo Kit - sold
Turbonetics (F168/.95ar) 76 mm ball bearing T-4 turbo with Full stainless hot side with fender exit down pipe. Fully tig'd and wrapped, v-banded, RG-45 waste gate and blow off valve included. Retains A/C in stock location manifolds included, 4" cold side with Treadstone intercooler.
Quarter Stick w/cable sold
Turbosmart Dual Boost Controller (TS-0105-1002) Sold
Spoiler (non-OEM) sold
CME Valance sold
Griffin radiator w/ dual puller fans (P/N GRI-1-25272/SUM-G4850) sold
Spohn torque arm and tubular bracket with drive shaft loop (P/N 114-102) Del-Sphere Pivot, Dana 60 mount sold
QA1 coil overs - Fronts (Single Adjustable spring 300# P/N VAR8612F-834) sold
QA1 coil overs - Rear (Dual Adjustable 150# springs P/N 122-RCK-52329) sold
UMI Tubular K-Member (P/N UMI2320) - sold
UMI Lower Control Arms Adjustable (P/N UMI2300) sold
UMI Upper Control Arms (P/N 2311) sold
Spohn Rear Lower Control Arms Adjustable sold


Inbox or text for more info, everything is negotiable, buyer pays shipping and PayPall fees if applicable. Parts are located in Oakdale NY - 11769
631-338-3055

Rear is a Dana 60I have had a t56 and 4l80 in the car with this bracket.

Sounds good, what else can I tell you about it?

Sorry, am not parting out the motor at this time.