When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Brand New 1250hp APS Extreme twin turbo system 98-02 Fbody
Category: Engine - Power Adders Price: $4995 Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird Location (State): NC Item Condition: Brand New Shipping Information: Item Can be Shipped Engine: LS1/LS6 LS Engine?: Fits LS Engine
Updated again on November 1, 2020.
I sold the kits I had listed 2 years ago and just got around to pulling a couple more out of storage at the beginning of 2020. I have sold 1 and have 1 Extreme kit left as of Nov. 2020.
Brand new F-body LS1 APS Extreme twin turbo system (98-02 F-body) for sale. The Extreme kit is capable of 65 lbs/min per turbo (approximately 1250hp). This kit includes all the benefits that APS was known for; cast iron manifolds, Tial external wastegates, massive bar/plate front mount intercooler, silicone connection hoses, etc... Allows for use of factory accessories including a/c. The extreme kit upgraded from the standard kit with 70mm silicone inlet hoses, 70mm compressor inlet, larger compressor wheel and 1.06 A/R turbine housing. PM me with any questions. $4995.00 plus Paypal and freight shipping
Kit requires use of a BMR KM003 or KM019 k-member and an MSD APS mini starter (neither included)
Last edited by MadBoost; 11-18-2020 at 07:47 AM.
Reason: updates
I thought they went out of business years ago, hence the reason I ended up going with Huron Speed. Those APS kits are killer! If I could only turn back the clock.....
Being in the right place at the right time and I used to work for a former APS dealer in Florida who might still have some various APS C6 and Fbody pieces that have been collecting dust while sitting up on pallet racks.
Being in the right place at the right time and I used to work for a former APS dealer in Florida who might still have some various APS C6 and Fbody pieces that have been collecting dust while sitting up on pallet racks.
They really are great kits. I have the standard kit still holding up... Wish you were selling the turbos separate id like to upgrade to the extreme for the larger housings. to bad the dkt/precisions evaporated into thin air. That would be a good upgrade.
Yes, a/c is still in place with this kit. I also talked to BMR this past week and they informed me the BMR KM019 will also work with the APS kit and will have more clearance for the silicone inlet tubes. An APS kit owner, forum member "Barnat" worked with them to create more clearance on the inlet side of the compressor. So either the KM003 or KM019 can be used but NOT the one they have listed for "Turbo".
I have been around quite a few APS C5/C6/C6Z and 350z/g35 kits with similar turbo locations and never had a customer complain or even seen a complaint about cabin temperatures on any of the APS threads on numerous forums.
To me, their kit takes the 1 major disadvantage of turbos (having a bunch of hot side piping routing around underneath the car) and gets rid of it since the turbos mount straight to the manifolds.
1 Extreme kit has sold and been delivered. The 2nd kit is still sitting in standard trim and would take me about a week to upgrade to the Extreme compressor wheel and balance.
04-30-2018, 02:31 PM
Brand New 1250hp APS Extreme twin turbo system 98-02 Fbody 
