new 408 w ls3 heads forged
#1
On The Tree
Thread Starter
iTrader: (8)
Join Date: Nov 2007
Location: the couve, washington
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
new 408 w ls3 heads forged
Category: Engine - Complete Motors
Price: $7500
Location (State): WA
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
built for a car I no longer have and bought some old GTO's. Told the wife I would sell the motor and my 98 mildly modified 50k mile Formula to get the Goats.
03 6.0 block from a 59k escalade. All forged K1 crank, scat rods and GSX pistons and rings. 235/243 cam mild for engine. ported oil pump,ARP bolts, billet double timing chain. New LS3 heads with BTR springs, new rockers with trunion upgrade. Smith bros push rods. New ls3 intake assembly with DBW TB. Super damper balancer truck offset.
F body oil pan setup.
Heads cleaned up in the bowls and exhaust worked a little to create better flow. balanced and professionally assembled with the utmost care in making sure clearances are exact. Builder took a long time to put together properly. We went through 2 sets of bearings to get clearances just right. if you want truck accessoris I can include truck brackets, PS pump, alternator and a nice clean starter.
So basically it is about complete, block was painted gloss black and the raw aluminum was left alone. Builder says no problem mellow and 600-620 HP. I have over 9k in this engine and hate to take a loss.
But I like being married.
asking
Willing to ship I have an engine container to keep it safe
Last edited by gto65lvr; 08-28-2017 at 07:23 PM. Reason: Sold
#5
built for a car I no longer have and bought some old GTO's. Told the wife I would sell the motor and my 98 mildly modified 50k mile Formula to get the Goats.
03 6.0 block from a 59k escalade. All forged K1 crank, scat rods and GSX pistons and rings. 235/243 cam mild for engine. ported oil pump,ARP bolts, billet double timing chain. New LS3 heads with BTR springs, new rockers with trunion upgrade. Smith bros push rods. New ls3 intake assembly with DBW TB. Super damper balancer truck offset.
F body oil pan setup.
Heads cleaned up in the bowls and exhaust worked a little to create better flow. balanced and professionally assembled with the utmost care in making sure clearances are exact. Builder took a long time to put together properly. We went through 2 sets of bearings to get clearances just right. if you want truck accessoris I can include truck brackets, PS pump, alternator and a nice clean starter.
So basically it is about complete, block was painted gloss black and the raw aluminum was left alone. Builder says no problem mellow and 600-620 HP. I have over 9k in this engine and hate to take a loss.
But I like being married.
asking 7500 or best reasonable offer,
Willing to ship I have an engine container to keep it safe
03 6.0 block from a 59k escalade. All forged K1 crank, scat rods and GSX pistons and rings. 235/243 cam mild for engine. ported oil pump,ARP bolts, billet double timing chain. New LS3 heads with BTR springs, new rockers with trunion upgrade. Smith bros push rods. New ls3 intake assembly with DBW TB. Super damper balancer truck offset.
F body oil pan setup.
Heads cleaned up in the bowls and exhaust worked a little to create better flow. balanced and professionally assembled with the utmost care in making sure clearances are exact. Builder took a long time to put together properly. We went through 2 sets of bearings to get clearances just right. if you want truck accessoris I can include truck brackets, PS pump, alternator and a nice clean starter.
So basically it is about complete, block was painted gloss black and the raw aluminum was left alone. Builder says no problem mellow and 600-620 HP. I have over 9k in this engine and hate to take a loss.
But I like being married.
asking 7500 or best reasonable offer,
Willing to ship I have an engine container to keep it safe
Who was the engine builder and have all paper work?
#6
On The Tree
Thread Starter
iTrader: (8)
Join Date: Nov 2007
Location: the couve, washington
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Derek Stewart he is in Tigard pontiac guy and builds hp engines for a living. He has built a lot of hp motors locally and this is my 4 th engine with him. He is one of a couple people I trust . I have all most of the parts receipts. Mostly all from summit except pistons got those from tick performance
Trending Topics
#8
On The Tree
Thread Starter
iTrader: (8)
Join Date: Nov 2007
Location: the couve, washington
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Pm's answered I have no idea what shipping would be but I am sure 150-300. If I ship this it's without the trans. Make me a private offer on it shipped. It will come in a molded engine crate locked up and safe