GTO Parts
09-02-2017, 09:13 PM
#1
Teching In
Thread Starter
Join Date: Apr 2016
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
GTO Parts Category: Drivetrain
Price: $0
Part Fits: 04-06 Pontiac GTO
Location (State): VA
Item Condition: Used
LS Engine?: Fits LS Engine
Harrop Differential Cover - Used - Asking 350
I have no info on how many miles this cover saw. This was attached to a salvage diff I ordered (I know lucky). They even sent the diff to chassis cradle. Has all the hardware except the cradle/bracket to chassis bolts. Please note that the ABS sensor tabs appear to have been over-torqued, and have split at the threads (see attached). The existing sensors are quite snug, so I am selling with the brake sensors as shown in the pics. Both sensor tabs look the same. Cover looks good, no cracks, or pits in the sealing surface, just dirty.
GTO Diff Core - Asking 100, but negotiable due to shipping cost
Incase anyone needs a core for a diff build. Gear set is trash (5 sheared teeth). Stock posi, only had 26K miles on it.
BMR Half Shafts - PN CV001 NIB - 800
Brand new in box, with hardware.
BMR Stub Shafts - PN AS001 L/R - NIB - 300
Brand new in box, still in original bubble wrap.
09-03-2017, 09:35 AM
#4
Teching In
Thread Starter
Join Date: Apr 2016
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
I an in northern Va, near manassas.
I am pretty sure those ABS sensor mounts are harrop specific. They look just like the mounts that are on my car's harrop cover. The existing ABS sensors in the pictures are in there nice and tight, so I am selling the harrop with those ABS sensors installed in the mounts. Its just the hole where the sensor bolt mounts which was overtorqued and cause the casting to crack. The sensor bracket itself is ok, so it can still be mounted on the harrop cover and will work.
I am pretty sure those ABS sensor mounts are harrop specific. They look just like the mounts that are on my car's harrop cover. The existing ABS sensors in the pictures are in there nice and tight, so I am selling the harrop with those ABS sensors installed in the mounts. Its just the hole where the sensor bolt mounts which was overtorqued and cause the casting to crack. The sensor bracket itself is ok, so it can still be mounted on the harrop cover and will work.
09-25-2017, 07:55 PM
#7
Teching In
Thread Starter
Join Date: Apr 2016
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Hey Guys,
Please send offers, paint bills are hurting. I am starting to put some stuff on ebay, well below my asking prices, no reserve.
Harrop Diff Cover on ebay, starting at 215USD with no reserve
http://www.ebay.com/itm/Pontiac-GTO-...lZyCQd&vxp=mtr
Please send offers, paint bills are hurting. I am starting to put some stuff on ebay, well below my asking prices, no reserve.
Harrop Diff Cover on ebay, starting at 215USD with no reserve
http://www.ebay.com/itm/Pontiac-GTO-...lZyCQd&vxp=mtr