Category: Accessories
Price: $260
Location (State): CA
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine

Up for sale is everything you need to mount your Sanden 508 or SD7 AC compressor on an LS motor using the 98-02 factory accessory drive with alternator and power steering. Included is the mount bracket, mid range spacer (98-02 F-body), tensioner, idler pulley, all bolts and spacers and a belt. I installed this on my Studebaker and it fit perfectly on the motor and ran true. Unfortunately once I closed my low sloping hood, and turned the AC, on there was contact between the AC clutch rivets and hood. I did drive the car about 200 miles with it installed just not turning the AC on. Rather than try to modify the mounting system I decided to seek another solution. I have attached a scan of my receipt from Summit Racing showing the total I paid is $322. The prices have gone up slightly since then. I am also including a Gates serpentine belt that fits just right, cost for that was about $35 at my local O'reilly's. If you do not have a low, sloping hood, this is just what you need for a factory appearing AC install.

https://www.holley.com/products/ls_p...essory_drives/

Price reduced to $260 shipped to the lower 48. PM, email p.dilling at Outlook.com, or call or text five three zero 218-0641

 

Bump, If you are doing an LS swap with air conditioning this might be just what you need.

 

Bump, Price reduced to $260

 

do you have a picture of how it looks on the engine?

 

Sorry, it just sold. I did not take a picture of it when I had it installed. There is a thread on the Conversions forum with a couple pictures of it that others have posted.