Dipstick tube for L33 5.3 with LS3/2 oilpan
#1
Teching In
Thread Starter
Dipstick tube for L33 5.3 with LS3/2 oilpan
swapping 2004 Tahoe 5.3 - I think that’s an L33 - as a POC into Lotus Esprit- updating other thread that was moved to this forum... but it appears the dipstick tube-809-12570787 I thought would work will not. Seems to bottom out and can’t seat correctly - and it has to be bent around the starter but that seems ok. am I using the wrong tube altogether?
got the motor running and need to seal it up. Thanks and I will link the other thread when I’m not on the phone in a cold garage!... who thought the south got this cold!
got the motor running and need to seal it up. Thanks and I will link the other thread when I’m not on the phone in a cold garage!... who thought the south got this cold!
Last edited by 9mil; 01-16-2018 at 09:14 PM. Reason: Topic name
#2
TECH Senior Member
Yeah, y'all are getting some record CHILL... Stay warm man!
#3
Teching In
Thread Starter
#4
TECH Senior Member
As long as she's under it with you, what's the issue?? lol
#6
Teching In
Thread Starter
LOL- I guess you have a point! I guess it could be worse!
I saw that there was a pan just like this one with a different dipstick location- but i didnt see on mine. I might have to find and drill? i am thinking i have the dipstick and dipstick tube for that application, not the one that goes into the block- where i am trying to place it. I put about 5 quarts in it... should be good for a test start!
I saw that there was a pan just like this one with a different dipstick location- but i didnt see on mine. I might have to find and drill? i am thinking i have the dipstick and dipstick tube for that application, not the one that goes into the block- where i am trying to place it. I put about 5 quarts in it... should be good for a test start!