DFW tuner for upp twin turbo vette
08-17-2018, 02:13 PM
#1
Teching In
Thread Starter
Join Date: Dec 2007
Location: Tyler
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
DFW tuner for upp twin turbo vette First post in a long time, but wanting to get some first hand opinions. I’ve got a 2011 corvette that lifted a head and broke a ring back in January. It has now been rebuilt with forged rods, Pistons, head studs, heads just got cleaned up and a valve job. Went with a stage 2 tt btr cam as well while it was apart. It has been street tuned but just for drivability and no WOT. It is a little too much for my builder to do street tuning on above that and he does not have a dyno. Once I get it back home to Dallas I’m going to need a tuner. It was tuned with Quality Motorsports before and ran great up until the event that is.... calibrated by Karger is my other choice in my head though. Anyone have experience with either? I have a friend that is pushing me towards going back with quality but hard for me to tell if the head lifting was part of the tuning or just failure on the cars part.
08-18-2018, 09:13 AM
#3
Teching In
Thread Starter
Join Date: Dec 2007
Location: Tyler
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
