My pontiac

Does anyone have the bald eagle cam in a ls1? How do u like it? This is going in a 2000 trans am, t56, ls6 intake, lt headers, borla back. This is first time putting a cam in a car so i dont know what to expect out of it. Is there a better cam for my set up. Thanks

Summitracing

Is there a Leroy specific cam or one of the Bald Eagles in general? We can plug it in the cam timer and compare.

C5SixSpeedZ51

I can think of 10 other cams id run besides that one.
I dont get the hype about cleetus, his cars are nothing to brag about and they look like junk.Lol
I honestly cant stand him.

Bob570

Fastest stick shift Corvette in the world, first GM 6 speed in the 7s.... nothing to brag about?

I'm sorry that you can't stand seeing other people having fun and laughing.

@OP, I'm assuming you're talking about the Bald Eagle cam for naturally aspirated LS1/2/6s. For some reason they don't want to release the full specs, but it is a 227/234 cam, so it should be pretty decent. My cam is 232/234 112 LSA and the street-ability is great and it makes great power. Any off the shelf cam from a reputable company like TSP, BTR, Tick Performance etc. that is in a similar range would be a good choice for a cam only or H/C/I street car.

C5SixSpeedZ51

What kind of heads are you going to be running and what are you okay with as far as driving characteristics go? Summit does have some nice Cams available now. Midrange cams are really the best all around. 228/232 or 228/228 or 232/234
233/239 durations will be a good hard pulling cam.
Now the Bigger Aggressive Cams
Like Magic Stick 3 or 4
Or a Ws6 Store Trex Cam would be a Very Hard Runner as well, but not be as good down low as the Midrange Cams do. Both Cams wouldnt be bad to drive if the Tune is done well. The bigger cams will dyno a higher # but the Midrange cam will obviously drive better.

C5SixSpeedZ51

Lol Dont Cry because I said I cant stand Cleetus.
I dont jump on the Band Wagon. I am entitled to dislike whoever.

Che70velle

iTrader: (6)

C5SixSpeedZ51

I like to clown around
I wanted to when I saw a Stack coming out the hood of a C6 !
Looked like Redneck Ville USA. Lmao

wannafbody

iTrader: (2)

BTR stage 2 or Cam Motion Titan 4. Both are 227 ish intake duration. Split duration is better than single duration.

C5SixSpeedZ51

X2 on the split duration.

tech@WS6store

iTrader: (2)

The tsp lobes are some of the quietest ive heard. We sell quite a few of the bald eagle cams. They make great numbers.
Recently had a friend tune one in an 03 c5 ls1 that put a length on a 402 4th gen, so thats not too shabby.
Our high lift asa is similar also but uses completely different lobes....i do expect ours to squeak out just a little more hp and tq though.

They do have 5 bald eagle cams
Cathedral na
Cathedral boost
Twin turbo 400+ ci stroker
Rect port na
Rect port boost

My pontiac

I did what everyone says to do when u want a cam and that is, ask the guys that knows. I messaged texas speed and told them what mods i have on my car and this is the cam they told me to go with. So i guess i will have to put it in and see how it works. If its not what i want i will change it.

Kjduvall

I was going to use that cam. But at the time tsp was 2 weeks out till I could get it. Pretty Shure the guy on phone said it was 227/234 111+2 or +3 for the cathedral n/a.

My pontiac

Kjduvall what cam did u end up going with.

Kjduvall

232/234 110+1 it's not for everyone though. Lots ove over lap and choppy as hell but that's what I wanted. Bald eagle cam will have better drivability than mine.

99SSLSWON

This is one of the best posts I have ever read. Hats off to you

I have the WS6Store High Lift ASA Cam also with T56 and similar supporting mods. Very similar cam just with different lobes. I think you will like yours. Especially if it's a daily driver. Mine has tons of midrange power and a pretty nasty idle. It was easily tuned. I can cruise low speeds in 6th gear, and even chug it up a hill with no bucking or surging.

Just like you said, if you dont like it, learn from it and try a new bump stick! It's all part of the fun.

Mr. Black

Well it's nice to see a time honored tradition of LS1tech bringing on new members that just spew out bullshit lol.

C5SixSpeedZ51

Lol I'm glad you said that buddy, Its good to see the same O'l **** talkers and time honered *** holes that you usually find on here. Im entitled to express my opinion just like everybody else is. Its my God given right here in the good ol' Say what you want, because you dont know at the end of the day.

C5SixSpeedZ51

I apologize if I ruffled anyone's "feathers"
I was just trying to tell the man that there is a whole lot more Camshafts to choose from besides the Bald Eagle Cam. I hope Your Engine Runs good with what ever choice you make.

G Atsma

I have to agree. Whatever he is in real life, he comes off as a real dumbass to the public...