Swap Specialties Stand Alone Harness
03-20-2019, 05:52 PM | Replies: 47 | Views: 6124
-
Price
$375
- Location St. Louis, MO, 63366, USA
Description:
Swap Specialties Standalone harness, labeled and color coded, nylon wrapped, OBD2 ran, everything ran to a fuse block. Harness really cleans up the engine bay of your swap.
FITS GEN III MOTORS WITH 24X RELUCTOR WHEEL DBC
Emissions deleted
AC delete
Fan relays wired in
I was running a t56 - this harness does not have a pigtail for reverse lockout. It does, however, have a VSS pigtail ran.
Harness was mocked up, and saw idle time, but never saw the road. To build this same harness new, it costs $624. Price is $375 shipped firm - i will not go lower. Paypal add 3% for goods and services.
Last edited by 93Rat; 04-21-2019 at 10:33 PM.
Reply
Trending Topics
#15
This was used on a gen III LS with 24X reluctor wheel. I had the harness built with extra slack running from the bay to the ECU, so it should fit the chassis no problem. As stated above, it has a reverse lockout plug only, that ran to a t56. My harness does not have plugs ran for any trans, except for the reverse lockout for a t56.
#18
This was used on a gen III LS with 24X reluctor wheel. I had the harness built with extra slack running from the bay to the ECU, so it should fit the chassis no problem. As stated above, it has a reverse lockout plug only, that ran to a t56. My harness does not have plugs ran for any trans, except for the reverse lockout for a t56.