this is a project i was building to compete w/ some of the prescott's on www.EOCF.com everything is brand new, and only taken out of the boxes to mount.

motherboard- ASUS p4p800se (nuff said) $70.00
http://store.yahoo.com/directron/p4p800.html

cpu- p4 3.0e $130.00
http://directron.com/p43e.html


case- all aluminum beantech mid-tower igloo-1 (comes with a brand new lite-on lightscribe dvd-rw combo drive) $85.00
http://us.st11.yimg.com/us.st.yimg.c...1893_967880543
http://www.hardwarezone.com/articles...cid=29&id=1874

psu- enermax eg651p-ve fm psu (550w) (36a @ +12v single rail) 90.00 this is excellent for running numerous raid-0 drives, and maintaining alot of room to o.c. the 3.0 prescott
http://www.newegg.com/Product/Produc...82E16817103437

cpu cooler- Noctua 120mm heatpiper (imported from U.K.) 70.00 this is the very best cooler you can use for maximum temps on air. this thing cools better than most water *kits* on the market.
http://reviews.pcapex.com/cooling/no...cpu_cooler.php

includes Numerous MODDING supplies... including 50.00 worth of electrical conduit, and various other sleeving, and other supplies.

also included is a CUSTOM COOLER MASTER STACKER server case 100.00.... comes w/ crossflow motherboard fan, and various mods... the case is beautiful, and would make a good water cooled/ or phase change case! the side panel had a large porthole cut into it, and is still a little rough (needs finishing, or trim)


all the parts/hardware above are like brand new, and come with boxes/manual/and various pieces that come new with said hardware.

***everything for 550.00***
w/ good ram this is capable of 4ghz+
this is a project that has been put together partially. i was going to sleeve all the wiring in metal conduit. the light-on dvdrw drive has been permenantly stealthed to this case. i have pics attached of what im talking about...
links to pics:
http://i3.photobucket.com/albums/y82...octuaPuter.jpg
http://i3.photobucket.com/albums/y82...terwiring2.jpg
http://i3.photobucket.com/albums/y82...terwiring1.jpg

cooler master case:
http://i3.photobucket.com/albums/y82...CtopFront1.jpg
http://i3.photobucket.com/albums/y82...t/PCfront1.jpg
http://i3.photobucket.com/albums/y82...ttomFront1.jpg


***WANT TO TRADE FOR A LAPTOP IN THE SAME PRICE RANGE***

trey
7136289204

 

might consider getting it all together and built w/ a pair of raid-0 sata drives, some good ram, and a good vid. card. if a decent trade is offered.

trey

 

might trade for fbody parts/stuff

 

^^^^^^^^^up

 

**** updated links n stuff...



PRICES ARE OBO, and may trade for ls1 parts listed at the bottom:

motherboard- ASUS p4p800se (nuff said) $70.00
http://store.yahoo.com/directron/p4p800.html

cpu- p4 3.0e $130.00 (yup e0 stepping)
http://directron.com/p43e.html


case- all aluminum beantech mid-tower igloo-1 (comes with a brand new lite-on lightscribe dvd-rw combo that has been permanantly stealthed) $85.00
http://www.beantech.com/products/al...ases-igloo1.htm
http://compreviews.about.com/od/cdd...OnSHM165H6S.htm

psu- enermax eg651p-ve fm psu (550w) (36a @ +12v single rail) 90.00 obo
this is excellent for running numerous raid-0 drives, and maintaining alot of room to o.c. the 3.0 prescott (good for presler/crossfire rigs too) i have sleeved the motherboard power wires w/ metal electrical conduit (looks good!)
http://www.newegg.com/Product/Produ...N82E16817103437

cpu cooler- Noctua 120mm heatpipe (imported from U.K.) 70.00 this is the very best cooler you can use for maximum temps on air. this thing cools better than most water *kits* on the market.
http://www.driverheaven.net/reviews/noctua/index.htm

CUSTOM COOLER MASTER STACKER server case 100.00.... comes w/ crossflow motherboard fan, and various mods... the case is beautiful, and would make a good water cooled/ or phase change case! the side panel had a large porthole cut into it, and is still a little rough (needs finishing, or trim)
comes with Numerous MODDING supplies... including 50.00 worth of electrical conduit, and various other sleeving, and other supplies. this stuff will be thrown in with the coolermaster case.
http://www.directron.com/stct01uw.html

all the parts/hardware above are like brand new, and come with boxes/manual/and various peices that come new with said hardware. notthing has been in actual use... just mounted to mach up a case for various modding ideas.


everything is getting parted

*looking for the following parts:
ported ls6 pump
arp headbolt kit
clutch
poly motor/tranny mounts
decent condition lid (mine is cracked)
various interior pieces
im open to other ls1 stuff.

trey
pm w/ questions

 

noctua cooler is sold, everything else for sale still

 

^^^^^^^^^^^^^^6

 

looking for some halos if n e 1 wants to trade...

 

enermax is still for sale