WTB: LT1 air intake housing (portion between throttle body & MAF).
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
I also have a trick flow i went from none to having two. I have a polished one ill sell. It eliminates that moisture tube and crap from the bottom of it. Much nicer and cleaner looking
White 96LT1: Won't be available for a week or 2.
indianakid: No recent reply from him. Inquired about a pic and sent me a copied one from the internet.
Whitez406: No deal with him. Won't provide pics.
Still looking.
indianakid: No recent reply from him. Inquired about a pic and sent me a copied one from the internet.
Whitez406: No deal with him. Won't provide pics.
Still looking.
Whitez406, take a picture of the item with a digital camera, load it to a computer, and you can either send it to me in a file through email, or host it on the net and post in the thread (here).
porksoda,
porksoda,
Originally Posted by 98 TA
Whitez406, take a picture of the item with a digital camera, load it to a computer, and you can either send it to me in a file through email, or host it on the net and post in the thread (here).
porksoda,
porksoda,
Originally Posted by Whitez406
You need a dig. camera for that dont you?
Originally Posted by 98 TA
Whitez406, take a picture of the item with a digital camera,
load it to a computer, and you can either send it to me in a file through email, or host it on the net and post in the thread (here).
load it to a computer, and you can either send it to me in a file through email, or host it on the net and post in the thread (here).
I'm saying I have a stock rubber elbow with the bottom of a shampoo bottle shoved into the big rubber piece on the bottom of the elbow. If you look at a stock elbow you will see a big piece that sticks down toward the water pump, that is the silencer and I closed that up.