93-97 LT1 part out
93-97 LT1 part out Hey guys, Decided to move on away from the car scene for while so I got a lot of stuff that's gonna have to go.
1. MSD 6AL......... 170.00
2. CSR waterpump already mounted 5000 miles on it........125.00
3. ARP head stud kit(hex head).........100.00
4. AS&M monoblade TB with all sensors..........350.00(sold)
5. LE ported intake.......100.00(sold)
6. Pacesetter headers(coated) w/ Y pipe.........300.00(sold)
7.12 bolt rear, 31 spline w/ eaton posi 3.90 gear.......1800.00
8.3.5" Driveshaft made to match the 12 bolt rear w/ good yoke 200.00(will do 150.00 if ya buy the 12 bolt with it)
9. Bilstien HD shocks Front(New on shelf) and Rear(1000 miles on them)......300.00
10. Corbeau CR1 Black seats w/brackets........500.00
11.Autometer phantom new in box electric fuel pressure gauge.......160.00
12. 2 pod pillar........40.00
13. Autometer Phantom boost 30 to 20.........40.00
14. Compcam magnum pushrods stock length(1000 miles).......80.00
15.Black crinkle chevrolet centerbolt VC's.........100.00
16. Hurst billet plus shifter.........150.00
17. SLP leather shift ****.........50.00
18. Edelbrock solid panhard rod.........70.00
19. Solid LCA's... 100.00
The rotating assembly and block with be up for sale later but I want to tear it down to check and see how bad the spun rod bearing was before it's sold to someone. Also blower cam, lifters, and other misc. items will pop up later.
Thanks,
Mikey
1. MSD 6AL......... 170.00
2. CSR waterpump already mounted 5000 miles on it........125.00
3. ARP head stud kit(hex head).........100.00
4. AS&M monoblade TB with all sensors..........350.00(sold)
5. LE ported intake.......100.00(sold)
6. Pacesetter headers(coated) w/ Y pipe.........300.00(sold)
7.12 bolt rear, 31 spline w/ eaton posi 3.90 gear.......1800.00
8.3.5" Driveshaft made to match the 12 bolt rear w/ good yoke 200.00(will do 150.00 if ya buy the 12 bolt with it)
9. Bilstien HD shocks Front(New on shelf) and Rear(1000 miles on them)......300.00
10. Corbeau CR1 Black seats w/brackets........500.00
11.Autometer phantom new in box electric fuel pressure gauge.......160.00
12. 2 pod pillar........40.00
13. Autometer Phantom boost 30 to 20.........40.00
14. Compcam magnum pushrods stock length(1000 miles).......80.00
15.Black crinkle chevrolet centerbolt VC's.........100.00
16. Hurst billet plus shifter.........150.00
17. SLP leather shift ****.........50.00
18. Edelbrock solid panhard rod.........70.00
19. Solid LCA's... 100.00
The rotating assembly and block with be up for sale later but I want to tear it down to check and see how bad the spun rod bearing was before it's sold to someone. Also blower cam, lifters, and other misc. items will pop up later.
Thanks,
Mikey
Last edited by tryintogofast; Aug 22, 2007 at 01:57 PM.
