few things for sale
Thread Starter
LS1TECH Sponsor
iTrader: (33)
Joined: Jul 2002
Posts: 4,399
Likes: 0
From: Out on the farm in Central IL
few things for sale BMR Extreem Drag rear anti roll bar red - SOLD
Racetronix 99 F Body PNP pump in the bucket with the hotwire kit SOLD
Burkhart ABS Delete block SOLD
TH350 RMVB, Brake, Aluminum drum, 36 element sprags, 2 additional clutch packs for 1-2 and 2-3, deep AL pan with temp sensor, working VSS sensor. Has about 40 passes. No converter, just the trans. I have over 2000.00 in the trans. 1400.00 pus shipping. I also have a Strange CM shaft I can sell with this.
BBC motor plates for F Body 150.00 shipped.
Racetronix 99 F Body PNP pump in the bucket with the hotwire kit SOLD
Burkhart ABS Delete block SOLD
TH350 RMVB, Brake, Aluminum drum, 36 element sprags, 2 additional clutch packs for 1-2 and 2-3, deep AL pan with temp sensor, working VSS sensor. Has about 40 passes. No converter, just the trans. I have over 2000.00 in the trans. 1400.00 pus shipping. I also have a Strange CM shaft I can sell with this.
BBC motor plates for F Body 150.00 shipped.
Last edited by Steve Burger; Feb 26, 2008 at 10:20 AM.
How much would you want to sell the CM driveshaft for? I'm in need of a driveshaft for my th350 since i'm using a stock steel one now. Do you know how much longer this shaft is than the stock driveshaft?
Thread Starter
LS1TECH Sponsor
iTrader: (33)
Joined: Jul 2002
Posts: 4,399
Likes: 0
From: Out on the farm in Central IL
The delete block is plug and play. The hardest part is bleeding the brakes.
The DS is stock length and works with the th350 if you have the right tailshaft. Let me noodle on price. I really wanted to sell with the trans.
The DS is stock length and works with the th350 if you have the right tailshaft. Let me noodle on price. I really wanted to sell with the trans.
Sound good steve. I just thought the driveshafts setup for the th350's, with I think mine is the 9" tailshaft, took a touch longer driveshaft because mine looks like it could be an inch or two longer. Although it has been a while since I have been under the car to take a look at it. If you do decide to sell just let me know. I'm probably going to put my aluminum ls1 driveshaft in and call it good enough, but I would prefer to have a CM shaft if I could find one for a good price.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
