engine 350 vortec cams 280h Hi, I have a engine 350 vortec. I have installed cams comp 280H now I want to install a intake manifolds and carb edelbrock what is the right size and what is the intake manifolds is apprqopriate http://www.compcams.com/Company/CC/c...x?csid=79&sb=2 |
We need more specifics, what kind of car is in, what are your goals and usages, is it currently fuel injected and computer controlled? You'll need a vortec style intake, not just any traditional chevy intake will work. |
Originally Posted by biketopia
(Post 19926259)
We need more specifics, what kind of car is in, what are your goals and usages, is it currently fuel injected and computer controlled? You'll need a vortec style intake, not just any traditional chevy intake will work. engine 5.7 heads Vortec injection computer Cams comp 280h I want to Conversion to carb intake manifolds and carb What is the appropriate cfm number carb What is the appropriate intake manifolds |
Upupupup |
A dual plane intake made specifically for Vortec heads should work ok with that cam. Are you keeping computer control on the engine? What trans is in it. If you wan't to you can get a HEI or ready to run distributor and get rid of the ECM all together. But you will have to figure out your gauges. You'll need a way of regulating fuel pressure down as TBI injection is still a little too high for a carb. Unless your block was machined for a fuel pump push rod then you can run a manual pump. I run a 750DP on my vortec headed small block |
All times are GMT -5. The time now is 09:20 PM. |
© 2024 MH Sub I, LLC dba Internet Brands