should I get some aluminum heads and do a TPI conversion?
10-23-2005, 03:04 PM
#1
Teching In
Thread Starter
Join Date: Oct 2005
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Hello, need advice Hi,
I have a Toyota pickup with a SBC, TH350, and Danna rear-end.
The SBC is from a 1985 Camaro and I plan to go to TPI (everything is inhouse and ready). I don't know if I should get some nice aluminum heads and do the TPI conversion or if I should be looking for a donor car.
Any suggestions on heads or donor cars? Are there any aluminum block donors out there that bolt up like the 305 I have now?
Thanks,
Vin
I have a Toyota pickup with a SBC, TH350, and Danna rear-end.
The SBC is from a 1985 Camaro and I plan to go to TPI (everything is inhouse and ready). I don't know if I should get some nice aluminum heads and do the TPI conversion or if I should be looking for a donor car.
Any suggestions on heads or donor cars? Are there any aluminum block donors out there that bolt up like the 305 I have now?
Thanks,
Vin
10-23-2005, 08:55 PM
#3
Teching In
Thread Starter
Join Date: Oct 2005
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Looking for SBC advice Hi,
I have a Toyota pickup with a SBC, TH350, and Danna rear-end.
The SBC is from a 1985 Camaro and I plan to go to TPI (everything sitting around and ready to go except the wire harness). I don't know if I should get some nice aluminum heads and do the TPI conversion or if I should be looking for a donor car.
Any suggestions on heads or donor cars? Are there any aluminum block donors out there that bolt up like the 305 I have now?
Thanks,
Vin
I have a Toyota pickup with a SBC, TH350, and Danna rear-end.
The SBC is from a 1985 Camaro and I plan to go to TPI (everything sitting around and ready to go except the wire harness). I don't know if I should get some nice aluminum heads and do the TPI conversion or if I should be looking for a donor car.
Any suggestions on heads or donor cars? Are there any aluminum block donors out there that bolt up like the 305 I have now?
Thanks,
Vin
