transamkid1985

iTrader: (1)

I am building a chevy 350 and have this cam in it http://store.summitracing.com/partde...3&autoview=sku

I was wondering what are the best flowing heads to get i also have a edelbrock intake with a holley 750cfm carb. Any help with this matter would be greatly appreciated.

fatjet00

My personel opinion is a set of AFR 190 heads. The choices are endless. How much money do you have to spend on a set of heads? Thats the main question. Do you want cast iron or aluminum? How much power are you expecting out of it? You know with that cam your going to need to run at least 10:1 copression. Go to either summit racing or jegs website and look up all the heads they have.

transamkid1985

iTrader: (1)

Yeah i know the compression is gonna be high and im planning on spending 800 or 1000 for a good set of aluminium heads.

Shawn @ VA Speed

iTrader: (3)

i use the brodix ik 180 heads on 350s with great sucess,made 450 flywheel hp with those on 350s,i can hook you up with a set for $1025.00

sickss228

iTrader: (27)

I've got set of Trickflow 195's w a 64cc chamber, only 5-8 hours of run time, selling them for $700 PM me if interested.

transamkid1985

iTrader: (1)

What about these heads i found on jegs? Would they work?

http://www.jegs.com/i/Dart/301/11711...y=OrderItemAdd

Eric95

iTrader: (3)

those heads are sold individually so theyre gonna cost you alot more than the 800-1000 u said u wanted to spend

transamkid1985

iTrader: (1)

Oh!!!!! I just seen that guess ill keep looking.

torquejunky

iTrader: (10)

First off IMO those heads are to big for your cam, I would go with the Dart Pro 1 platinums but get the ones with 200 runners. I ran those on my 71 Z that had a 383 and a cam that had just a little more lift than yours (.507/.525) and it ran like a raped ape. If you ever plan on a bigger cam then you could get the 230s or just get 200s and have em ported when you up the cam. PM me and I'll let you know where I got my pair for 1100 fully assembled and shipped to my door...

Ryan02SS

iTrader: (3)

If you want to spend $800-1K on heads then by all means jump on that deal. Those heads are $1450-1500 a pair if they are the CNC models and flow pretty decent.