LME Shortblock sale
12-06-2006, 01:06 PM
#1
LS1TECH Sponsor
Thread Starter
iTrader: (4)
Join Date: Aug 2004
Location: NW Houston
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
LME Shortblock sale LME Shortblock Sale!!
LME is happy offer some of our most popular combinations at a great price for the month of December.
L92 416” Shortblock
- GM L92 block
- Callies 4340 4.0” stroke crankshaft w/ small journal rod pin diam.
- Callies 6.125 H beam rods w/ ARP 2000 7/16” bolts & small journal rod pin diam.
- Wiseco custom forged nitrous pistons w any valve pocket configuration (any comp. ratio avail)
- NPR stainless chrome 1.2 1.2 3mm ring pack (for high heat applications)
- Clevite 2199 H mains, Clevite CB 745 H rods, Dura Bond CH-23 cam bearings
- ARP main studs
- $5549
LS2 402” Shortblock
- GM LS2 block
- Callies 4340 4.0” stroke crankshaft w/ small journal rod pin diam.
- Callies 6.125 H beam rods w/ ARP 2000 7/16” bolts & small journal rod pin diam.
- Wiseco custom forged nitrous pistons w any valve pocket configuration (any comp. ratio avail)
- NPR stainless chrome 1.2 1.2 3mm ring pack (for high heat applications)
- Clevite 2199 H mains, Clevite CB 745 H rods, Dura Bond CH-23 cam bearings
- ARP main studs
- $5195
408” Iron Shortblock
- GM 6.0L Iron block
- Callies 4340 4.0” stroke crankshaft w/ small journal rod pin diam.
- Callies 6.125 H beam rods w/ ARP 2000 7/16” bolts & small journal rod pin diam.
- Wiseco custom forged nitrous pistons w any valve pocket configuration (any comp. ratio avail)
- NPR stainless chrome 1.2 1.2 3mm ring pack (for high heat applications)
- Clevite 2199 H mains, Clevite CB 745 H rods, Dura Bond CH-23 cam bearings
- ARP main studs
- $4995
LS7 427” Shortblock
- GM LS7 block
- Callies 4340 4.0” stroke crankshaft w/ small journal rod pin diam.
- Callies 6.125 H beam rods w/ ARP 2000 7/16” bolts & small journal rod pin diam.
- Wiseco custom forged nitrous pistons w any valve pocket configuration (any comp. ratio avail)
- NPR stainless chrome 1.2 1.2 3mm ring pack (for high heat applications)
- Clevite 2199 H mains, Clevite CB 745 H rods, Dura Bond CH-23 cam bearings
- ARP main studs
- $7199
Options:
-Complete Longblocks available (call or email to determine the best combination for your application)
- LS2 or Iron block w/ shelf 8cc rev. dome nitrous piston subtract $375 from price
- Eagle 4340 4.0” crank subtract $350
- Many cylinder head combinations for LS7, L92 & standard LS1 (call or email for more information)
- LME has several sets of custom pistons in stock for various applications. Turn around time is 3 to 4 weeks depending on application
* All blocks are fully deburred, line honed w/ ARP main studs, Decked to desired deck height w/ BHJ deck true fixture, Honed w/ torque plates, balanced to 1/4 oz. in. tolerance, ring end gaps & bearing clearances adjusted for your application and shortblock assembled w/ all plugs & dowel pins.
LME
713-849-4505
LME@houston.rr.com
LME is happy offer some of our most popular combinations at a great price for the month of December.
L92 416” Shortblock
- GM L92 block
- Callies 4340 4.0” stroke crankshaft w/ small journal rod pin diam.
- Callies 6.125 H beam rods w/ ARP 2000 7/16” bolts & small journal rod pin diam.
- Wiseco custom forged nitrous pistons w any valve pocket configuration (any comp. ratio avail)
- NPR stainless chrome 1.2 1.2 3mm ring pack (for high heat applications)
- Clevite 2199 H mains, Clevite CB 745 H rods, Dura Bond CH-23 cam bearings
- ARP main studs
- $5549
LS2 402” Shortblock
- GM LS2 block
- Callies 4340 4.0” stroke crankshaft w/ small journal rod pin diam.
- Callies 6.125 H beam rods w/ ARP 2000 7/16” bolts & small journal rod pin diam.
- Wiseco custom forged nitrous pistons w any valve pocket configuration (any comp. ratio avail)
- NPR stainless chrome 1.2 1.2 3mm ring pack (for high heat applications)
- Clevite 2199 H mains, Clevite CB 745 H rods, Dura Bond CH-23 cam bearings
- ARP main studs
- $5195
408” Iron Shortblock
- GM 6.0L Iron block
- Callies 4340 4.0” stroke crankshaft w/ small journal rod pin diam.
- Callies 6.125 H beam rods w/ ARP 2000 7/16” bolts & small journal rod pin diam.
- Wiseco custom forged nitrous pistons w any valve pocket configuration (any comp. ratio avail)
- NPR stainless chrome 1.2 1.2 3mm ring pack (for high heat applications)
- Clevite 2199 H mains, Clevite CB 745 H rods, Dura Bond CH-23 cam bearings
- ARP main studs
- $4995
LS7 427” Shortblock
- GM LS7 block
- Callies 4340 4.0” stroke crankshaft w/ small journal rod pin diam.
- Callies 6.125 H beam rods w/ ARP 2000 7/16” bolts & small journal rod pin diam.
- Wiseco custom forged nitrous pistons w any valve pocket configuration (any comp. ratio avail)
- NPR stainless chrome 1.2 1.2 3mm ring pack (for high heat applications)
- Clevite 2199 H mains, Clevite CB 745 H rods, Dura Bond CH-23 cam bearings
- ARP main studs
- $7199
Options:
-Complete Longblocks available (call or email to determine the best combination for your application)
- LS2 or Iron block w/ shelf 8cc rev. dome nitrous piston subtract $375 from price
- Eagle 4340 4.0” crank subtract $350
- Many cylinder head combinations for LS7, L92 & standard LS1 (call or email for more information)
- LME has several sets of custom pistons in stock for various applications. Turn around time is 3 to 4 weeks depending on application
* All blocks are fully deburred, line honed w/ ARP main studs, Decked to desired deck height w/ BHJ deck true fixture, Honed w/ torque plates, balanced to 1/4 oz. in. tolerance, ring end gaps & bearing clearances adjusted for your application and shortblock assembled w/ all plugs & dowel pins.
LME
713-849-4505
LME@houston.rr.com
12-07-2006, 10:58 AM
#3
LS1TECH Sponsor
Thread Starter
iTrader: (4)
Join Date: Aug 2004
Location: NW Houston
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
LME's 347 is 3500. I can give a little break and build it for 3300. This would include a new LS6 block, stock crank, Callies rods, Wiseco pistons, and all the same bearings and main studs listed above.
We look forward to doing business with you.
Sincerely,
Bryan Neelen
LME
713-849-4505
We look forward to doing business with you.
Sincerely,
Bryan Neelen
LME
713-849-4505
12-08-2006, 10:07 AM
#5
I am looking for a quote on your aluminum 402, but with some different options. I would like to use a Eagle crank instead of the callies, and I would like low compression 8.6:1 ish pistons to use with l92 heads. The motor will be getting a f1r procharger. Let me know the price shipped to 78749.
Just for fun, also give me a price on an aluminum ls2 based 370 for the same application.
Just for fun, also give me a price on an aluminum ls2 based 370 for the same application.
12-08-2006, 04:35 PM
#6
LS1TECH Sponsor
Thread Starter
iTrader: (4)
Join Date: Aug 2004
Location: NW Houston
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Firechikn
How about a iron 370? I'm in the market.
Thanks,
Bryan
LME
713-849-4505
12-08-2006, 04:50 PM
#7
LS1TECH Sponsor
Thread Starter
iTrader: (4)
Join Date: Aug 2004
Location: NW Houston
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by xssive
I am looking for a quote on your aluminum 402, but with some different options. I would like to use a Eagle crank instead of the callies, and I would like low compression 8.6:1 ish pistons to use with l92 heads. The motor will be getting a f1r procharger. Let me know the price shipped to 78749.
Just for fun, also give me a price on an aluminum ls2 based 370 for the same application.
Just for fun, also give me a price on an aluminum ls2 based 370 for the same application.
Thank you,
Bryan
Trending Topics
12-13-2006, 01:17 PM
#11
LS1TECH Sponsor
Thread Starter
iTrader: (4)
Join Date: Aug 2004
Location: NW Houston
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by pewter01z
+1 on the LS2 based 370. Callies rods and dished pistons.
thanks
thanks
Hello,
The 365" LS2 w/ the custom pistons & rings is $4345.
Feel free to ask any questions.
Sincerely,
Bryan Neelen
LME
713-849-4505
