Bandit2000

iTrader: (1)

I want to install a Clarion VX400 6.5 inch touch screen radio in my Trans AM and I was just wondering if that was even possible. I have a shitty Clarion flip out in my car right now which I got for cheap and is causing nothing but problems. Thanks in advance.

WhiteBird00

iTrader: (4)

Do a search on "double DIN" to find lots of information on this subject. Many people have done this upgrade (myself included). You will need to buy a modified trim bezel or else modify the factory one yourself.

Fosnot

iTrader: (15)

Not hard to do at all, looks real good if you do it right...
went from...


To this...


With some slight modification...



I got this...

WhiteBird00

iTrader: (4)

Not to be too critical but there are much better looking double DIN bezels available:

Bandit2000

iTrader: (1)

Whats the model of that pioneer?

WhiteBird00

iTrader: (4)

That's an AVIC-D3 which is a model that has been discontinued but is still available some places. I have since replaced it with a Kenwood DNX-5120.

VIP1

Whitebird00's unit is now in my car...
(Over 2 years now actually)

Here is what it looks like installed:



Here is how I did it:
https://ls1tech.com/forums/stereo-el...installed.html

krislem1990

iTrader: (3)

where do you get this one? it looks amazing. i am talkin about the double din. i want to do it to mine. but i am not a big fan of the 6litereater one. i ordered a few things from him already but i am not a fan of his double din. i want this one that u have posted here if that is possible?

WhiteBird00

iTrader: (4)

Actually, that bezel was a prototype made by a former member here that was planning to sell them. I have since replaced it with one of 6litereater's vinyl covered ones that I feel looks much better. I still have the prototype in my garage. If you want it, I'll sell it for $60 shipped. The corners of the faceplate opening are not square and if you look closely you can see the curvature on the left side isn't the same as on the right side but otherwise it fits fairly well as you can see.

krislem1990

iTrader: (3)

will it fit in a 2000 camaro? beings u have a firebird will it be different?

WhiteBird00

iTrader: (4)

Firebird and Camaro bezels are completely different. The Firebird bezel just surrounds the head unit and HVAC controls. Camaro bezels go all the way up to the top of the dash including the switch slots (fog lights, ASR, convertible top) and the center vents.

krislem1990

iTrader: (3)

damn! lol well i havent seen my car in about 8 months i am in iraq so i couldnt compare rite away