3800RS

iTrader: (15)

Can someone give me some insight before i go fooling around in the car. Pulled the dash last weekend for the evap. Put it back together and the airbag light is on. Dr side yellow connector for the steering wheel is connected, so is the module under the center console and the pass side air bag is connected.

What could i of missed ?

3800RS

iTrader: (15)

are there grounds somewhere i could of missed ?

wssix99

iTrader: (5)

Scan it for the SIR codes. That should tell you exactly where the issue is.

3800RS

iTrader: (15)

i'll see if i can get any codes, maybe my aeroforce gauge can tell me

wssix99

iTrader: (5)

You'll have to check the instructions. Most scanners will only pull the powertrain codes. If you stop by a local auto parts store, they may have a scanner that will do the job.

3800RS

iTrader: (15)

tried to pull the codes with my gauge and it had none. is there a way to reset the light or something ? I am pretty sure all connectors are connected

wssix99

iTrader: (5)

Does your scanner say it has the ability to pull SIR codes? You should have one if the light is on.

3800RS

iTrader: (15)

i dont know if it does