Replaced the battery, now no power to the stereo
03-07-2015, 08:51 AM
#1
On The Tree
Thread Starter
Join Date: Dec 2012
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Replaced the battery, now no power to the stereo My battery died over the winter, so I let the car sit as its been snowing a ton in Jersey. I finally out the new battery in today, car fired up fine, runs fine, but I can't get the damn stereo to turn on.
It's an aftermarket kenwood that was installed prior to me buying the car, I've never had a problem before. I'm guessing something needs to be hooked up that isn't, there is one loose wire that has a cable lug at the end... Should this be Hooked up to the negative terminal?
Thanks
I'm going to post a couple of pictures but photo bucket blows... it won't load
It's an aftermarket kenwood that was installed prior to me buying the car, I've never had a problem before. I'm guessing something needs to be hooked up that isn't, there is one loose wire that has a cable lug at the end... Should this be Hooked up to the negative terminal?
Thanks
I'm going to post a couple of pictures but photo bucket blows... it won't load
Last edited by DrBlockHed; 03-07-2015 at 09:05 AM.
