nvrstsfd23

I am installing two pairs of 6.5 inch mtx 8.6 thunder components. My question is the rms for them is 60 watts. I found a thunder 404 amp with 35 watts rms x 4 and the thunder 684 with 60 watts rms x 4. There is about a 100 dollar price difference. Which one should I get. The rest of my system is two dual voice coil mtx thunder 8000 10's with a mtx thunder 1000D amplifier and the stock headunit until I can afford a indash dvd player.

transambandit

iTrader: (6)

everyone bashes on them but you can get a sony xplode off ebay for about 80 bucks or so, 4 channels 100w each, which is good because you dont have to turn the gains up high to run them, i personally think its a great amp for components/speakers but not for a sub.

nvrstsfd23

Yeah but I keeping the brand the same for the whole system except for the HU and Alarm.

Edrummr

iTrader: (1)

I'd consider this one.
Dood... I used to work in Hamiltucky.

nvrstsfd23

It's a good thing you got out when you good. Thanks I think that's the one I am going with.

cjnaputi

could anyone tell me why is it that my fuse on my amplifier is always blowing out and why my amplifier is overheating....

2MuchRiceMakesMeSick

Usually due to wrong ohm load. It could also be a transistor going bad in the amp.

2MuchRiceMakesMeSick

Get the bigger amp, it will make your front stage come to life. Make sure to cross them over at 100hz and up.