LED turn signals in side mirrors

Apparently the wires I used from under the dash are the ones that control the DRLs as well, because the way I wired it the lights stay on when the DRLs do. I have the automatic headlights bypassed in my car, so I'm not sure if that might cause it, but basically if you drive around without the headlights on in my car the LEDs stay lit up solid until you put your blinker on, and then they blink accordingly.
Now... I actually like this, just because I get to see my hard work shining all the time, but I know this would annoy some people because of the fact that this isnt how normal turn signal mirrors work. So I will probably figure out how to rewire them to only come on when the blinker is on, and then do the writeup.
When you get a chance.. Can you list some info on the resistor used, and some details of the LED as well. Thank again!

Apparently the wires I used from under the dash are the ones that control the DRLs as well, because the way I wired it the lights stay on when the DRLs do. I have the automatic headlights bypassed in my car, so I'm not sure if that might cause it, but basically if you drive around without the headlights on in my car the LEDs stay lit up solid until you put your blinker on, and then they blink accordingly.
Now... I actually like this, just because I get to see my hard work shining all the time, but I know this would annoy some people because of the fact that this isnt how normal turn signal mirrors work. So I will probably figure out how to rewire them to only come on when the blinker is on, and then do the writeup.
Anyway I'll pop open the dash today and fix it up
Last edited by RaRe99SS; Dec 13, 2005 at 05:17 PM.
The Best V8 Stories One Small Block at Time






