5.0 vs srt 300c
#7
The Gopros are mine I've spent money on my car. Just ain't much to record out here ppl with high horsepower cars don't really go out so I have to record what I can lol even these slow pokes
Trending Topics
#8
TECH Junkie
Nice video, better then half the trash waste of time videos in the dark 20 second clips that are posted here.
Funny how some of these clowns bitch at a shitty dark poor quality shaky video, then ya put a nice clean daylight video together with many cool angles and I guess you went overboard cause you don't dangle the front tires........ O well, ****'em!
SRT 300c's are over rated. Heavy *** **** and IMO don't run that hard
Funny how some of these clowns bitch at a shitty dark poor quality shaky video, then ya put a nice clean daylight video together with many cool angles and I guess you went overboard cause you don't dangle the front tires........ O well, ****'em!
SRT 300c's are over rated. Heavy *** **** and IMO don't run that hard
#15
Teching In
Join Date: May 2008
Location: Hill Country, TX
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Either way, the 6.1 in the video lost and that's all that matters. Good kill OP, tell him to buy a real cam and drop those big *** rims.
#19
Mine dyno'd 378rwhp stock and was trapping 110 in the 1/4 (88 in the 1/8th) (back east @ Richmond International. Wasn't negative DA but it sure wasn't high DA either). Cam only (412rwhp/405rwtq on a dynodynmaics) it was trapping 93-94 @ Irwindale (true cam only, not LS cam only) in 3k DA (103 degrees out) never ran it in the 1/4 with that setup. Just depends on the build, a lot of the guys run poo baby cams because that's what the forums tell them to buy. My car is LS1Tech "bolt on" now and I haven't run it to see what it'd do.
Either way, the 6.1 in the video lost and that's all that matters. Good kill OP, tell him to buy a real cam and drop those big *** rims.
Either way, the 6.1 in the video lost and that's all that matters. Good kill OP, tell him to buy a real cam and drop those big *** rims.
I was thinking RWHP
#20
Teching In
Join Date: May 2008
Location: Hill Country, TX
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts