Coyobra / F10 M5 / KB coyote / turbo Teg / C6Z
02-01-2016, 08:43 AM
#1
Teching In
Thread Starter
Join Date: Oct 2009
Location: Nashville / Indianapolis
Posts: 18
Likes: 0
Received 2 Likes
on
2 Posts
Coyobra / F10 M5 / KB coyote / turbo Teg / C6Z Had some great weather this weekend so some of us met up to travel across the boarder. I only got one decent run with the Integra, Ran the C6Z right after but I had clutch issues, found out later the cable was way out of adjustment. Hopefully get to run him soon again.
98 Cobra
coyote swap
full exhaust
3.73
CAI / Tune (93 oct)
Turbo Integra
built / sleeved
2300lbs + driver / pass
Made 420hp on a Mustang Dyno
C6Z
Bone stock
F10 M5
Intakes
Piggy back tune
Meth injection
~24psi
Coyote
2.8 Kenne Bell
12psi
E85
6sp
Coyobra vs Integra
Integra vs C6Z
M5 vs KB Coyote
98 Cobra
coyote swap
full exhaust
3.73
CAI / Tune (93 oct)
Turbo Integra
built / sleeved
2300lbs + driver / pass
Made 420hp on a Mustang Dyno
C6Z
Bone stock
F10 M5
Intakes
Piggy back tune
Meth injection
~24psi
Coyote
2.8 Kenne Bell
12psi
E85
6sp
Coyobra vs Integra
Integra vs C6Z
M5 vs KB Coyote
02-01-2016, 12:42 PM
#5
Teching In
Thread Starter
Join Date: Oct 2009
Location: Nashville / Indianapolis
Posts: 18
Likes: 0
Received 2 Likes
on
2 Posts
Thanks man!
Honestly I did too! He had me on weight and power but he kept insisting so I said alright, you can tell it was faster but I guess my torque got me out in front enough in the beginning to hold him off longer
Yeah they are strong for sure! I think with my drag setup on we would be really close! He has mods planned but hopefully we can get a run in before he changes
Honestly I did too! He had me on weight and power but he kept insisting so I said alright, you can tell it was faster but I guess my torque got me out in front enough in the beginning to hold him off longer
Yeah they are strong for sure! I think with my drag setup on we would be really close! He has mods planned but hopefully we can get a run in before he changes
02-01-2016, 01:15 PM
#6
Thanks man!
Honestly I did too! He had me on weight and power but he kept insisting so I said alright, you can tell it was faster but I guess my torque got me out in front enough in the beginning to hold him off longer
Yeah they are strong for sure! I think with my drag setup on we would be really close! He has mods planned but hopefully we can get a run in before he changes
Honestly I did too! He had me on weight and power but he kept insisting so I said alright, you can tell it was faster but I guess my torque got me out in front enough in the beginning to hold him off longer
Yeah they are strong for sure! I think with my drag setup on we would be really close! He has mods planned but hopefully we can get a run in before he changes
Trending Topics
02-01-2016, 02:21 PM
#8
Teching In
Thread Starter
Join Date: Oct 2009
Location: Nashville / Indianapolis
Posts: 18
Likes: 0
Received 2 Likes
on
2 Posts
I have a drag pack and it's going e85 this spring for safety reasons mostly with the nitrous, but The manifold I am passing on, It's expensive for me because that requires a hood and then to be painted lol. And when I go turbo in the near future, I prefer the stock intake, Seems to work well with boost!
Lol we all know this! Don't rub it in!
Lol we all know this! Don't rub it in!
02-02-2016, 08:41 AM
#12
7 Second Club
Good pulls!
02-02-2016, 11:10 AM
#14
Teching In
Join Date: Sep 2010
Location: Indianapolis Area
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
