Cwarta VS RedFuryZ28
#25
7 Second Club
Thread Starter
We're gonna make Nebraska great again!
#26
Staging Lane
iTrader: (1)
Join Date: May 2009
Location: Clear Lake Tx
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Still no Jake yet I see. But yet the second someone **** talks a 5.br0 tjere he is chiming in on how he destroys br0's. He can't take a 2v with mods lol and dicks out on a built 3rd gen. Typical Jake
#32
Teching In
Join Date: Sep 2016
Location: Dearborn, Michigan
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
You should see Verz very recently on a local Nebraska forum.
The 2 valve went to the track and ran a 13.2 @ 110 mph: http://starcityracing.com/Forums/sho...83#post1613683
Start here on page 9, post number 162, and you can see a local guy calls him out for a dig, since Verz has drag radials, and Verz won't do it, only 35 rolls for Verz http://starcityracing.com/Forums/sho...-a-bitch/page9
The 2 valve went to the track and ran a 13.2 @ 110 mph: http://starcityracing.com/Forums/sho...83#post1613683
Start here on page 9, post number 162, and you can see a local guy calls him out for a dig, since Verz has drag radials, and Verz won't do it, only 35 rolls for Verz http://starcityracing.com/Forums/sho...-a-bitch/page9
#33
On The Tree
iTrader: (1)
You should see Verz very recently on a local Nebraska forum.
The 2 valve went to the track and ran a 13.2 @ 110 mph: http://starcityracing.com/Forums/sho...83#post1613683
Start here on page 9, post number 162, and you can see a local guy calls him out for a dig, since Verz has drag radials, and Verz won't do it, only 35 rolls for Verz http://starcityracing.com/Forums/sho...-a-bitch/page9
The 2 valve went to the track and ran a 13.2 @ 110 mph: http://starcityracing.com/Forums/sho...83#post1613683
Start here on page 9, post number 162, and you can see a local guy calls him out for a dig, since Verz has drag radials, and Verz won't do it, only 35 rolls for Verz http://starcityracing.com/Forums/sho...-a-bitch/page9
#35
TECH Fanatic
iTrader: (12)
You should see Verz very recently on a local Nebraska forum.
The 2 valve went to the track and ran a 13.2 @ 110 mph: http://starcityracing.com/Forums/sho...83#post1613683
Start here on page 9, post number 162, and you can see a local guy calls him out for a dig, since Verz has drag radials, and Verz won't do it, only 35 rolls for Verz http://starcityracing.com/Forums/sho...-a-bitch/page9
The 2 valve went to the track and ran a 13.2 @ 110 mph: http://starcityracing.com/Forums/sho...83#post1613683
Start here on page 9, post number 162, and you can see a local guy calls him out for a dig, since Verz has drag radials, and Verz won't do it, only 35 rolls for Verz http://starcityracing.com/Forums/sho...-a-bitch/page9
#36
TECH Senior Member
iTrader: (26)
Just for fun, this was the mystic in action.
https://www.youtube.com/watch?v=E40cP-TLkJE
This is Jake's HCIE car vs the 2V. I think it can take Cwarta's car for sure.
https://youtu.be/54HRJi8YPNE
https://www.youtube.com/watch?v=E40cP-TLkJE
This is Jake's HCIE car vs the 2V. I think it can take Cwarta's car for sure.
https://youtu.be/54HRJi8YPNE
Last edited by kinglt-1; 10-10-2016 at 10:12 AM.
#39
TECH Senior Member
iTrader: (26)
It could be not properly tuned after the stall converter...might of just lifted slightly due to wheel spin and the trans shifted second gear. The tune is probably commanding a shift if the tps % is less then 95 or whatever. I went through that issue tuning mine and set it so it will hold first gear out to commanded shift mph vs rpm if it's over 80% TPS. And fyi I also have a manual shift kit so I can make it shift whenever I want and override the PCM.