LS1TECH - Camaro and Firebird Forum Discussion

LS1TECH - Camaro and Firebird Forum Discussion (https://ls1tech.com/forums/)
-   Street Racing & Kill Stories (https://ls1tech.com/forums/street-racing-kill-stories-36/)
-   -   WhiteWhale© vs Most built C7 M7 in Canadia (https://ls1tech.com/forums/street-racing-kill-stories/1921519-whitewhale-vs-most-built-c7-m7-canadia.html)

islander033 06-12-2019 07:51 PM

WhiteWhale© vs Most built C7 M7 in Canadia
 
Here we go with another FULL built vette (C7 M7)....It has trapped 141+ mph at my track. I left it in 4th due to cold road temps and I spun in third previously.


Dude is a good guy with a fast car, nice to make pulls with no drama.

rising_4rm_ashes 06-12-2019 08:46 PM

Pretty sweet ride man.

islander033 06-12-2019 08:49 PM


Originally Posted by rising_4rm_ashes (Post 20109047)
Pretty sweet ride man.

Thanks holmes!

V8EATR 06-12-2019 09:14 PM

Most excellent kill Senor Whale.

zz4camaro1980 06-13-2019 08:22 AM

Nice! Keep the vids coming, very impressive cars. Someday I'll have something on that level, haha.

HpipeFlowmasterStang 06-13-2019 09:14 AM

What a muscle stang!

islander be hurting feelings up in dis mug!

snake95 06-13-2019 09:25 AM

Great run! Vette definitely improper though. Duh.

ddnspider 06-13-2019 09:26 AM

Dang, kind of surprised it jumped out like that on you. Was it on a stock blower?

Red2kZ28 06-13-2019 10:07 AM

Nice death, Dennis! SLB C7's are no joke.

islander033 06-13-2019 11:51 AM


Originally Posted by V8EATR (Post 20109068)
Most excellent kill Senor Whale.

Thanks OJ!

Originally Posted by zz4camaro1980 (Post 20109198)
Nice! Keep the vids coming, very impressive cars. Someday I'll have something on that level, haha.

Thanks!

Originally Posted by HpipeFlowmasterStang (Post 20109223)
What a muscle stang!

islander be hurting feelings up in dis mug!

Well ya.

Originally Posted by snake95 (Post 20109231)
Great run! Vette definitely improper though. Duh.

Fully built and on 3rd motor.

Originally Posted by ddnspider (Post 20109232)
Dang, kind of surprised it jumped out like that on you. Was it on a stock blower?

He doesn’t make the instant TQ that I do. He left in 3rd and didn’t spin at all. I had to leave in 4th to keep from spinning at 60mph on the 50F road.

He’s on a centi kit that he over spins.

T.Man 06-13-2019 06:25 PM


Originally Posted by islander033 (Post 20109307)
Fully built and on 3rd motor.

This would indicate that whomever is doing the building/tuning hasn't done a very good job. This isn't to take a cheap shot at you/the WW. Your car performs.


Originally Posted by islander033 (Post 20109307)
He doesn’t make the instant TQ that I do. He left in 3rd and didn’t spin at all. I had to leave in 4th to keep from spinning at 60mph on the 50F road.

He’s on a centi kit that he over spins.

So essentially, you pulled even with him as he threw 5th gear?

Good stuff man. Thanks for sharing.

islander033 06-13-2019 08:53 PM


Originally Posted by T.Man (Post 20109524)
This would indicate that whomever is doing the building/tuning hasn't done a very good job. This isn't to take a cheap shot at you/the WW. Your car performs.



So essentially, you pulled even with him as he threw 5th gear?

Good stuff man. Thanks for sharing.

Thanks dude.

His first Lt1 dropped a valve in his drive way. 2nd one was built by Lingenfelter, a wrist pin keeper failed and it ate itself on the dino. 3rd motor is a replacement from Lingenfelter...no problems so far. None were toon issues.

OneSlowV 06-14-2019 03:26 AM

Must the nice to be able to start in 4th and come back around lol good run

Red2kZ28 06-14-2019 06:32 AM

Shelby got walked.

islander033 06-14-2019 09:16 AM


Originally Posted by OneSlowV (Post 20109643)
Must the nice to be able to start in 4th and come back around lol good run

LOL...no shit. Not bad for no torks.

islander033 06-14-2019 09:57 AM

Note: This vette just put a bus or 3 on a new front feed whipple 5.0 last night. It moves out pretty good. :)

T.Man 06-14-2019 02:55 PM


Originally Posted by islander033 (Post 20109589)
Thanks dude.

His first Lt1 dropped a valve in his drive way. 2nd one was built by Lingenfelter, a wrist pin keeper failed and it ate itself on the dino. 3rd motor is a replacement from Lingenfelter...no problems so far. None were toon issues.

that's some shitty luck!


Originally Posted by islander033 (Post 20109771)
Note: This vette just put a bus or 3 on a new front feed whipple 5.0 last night. It moves out pretty good. :)

Just goes to show how hard your car runs man. Good stuff.

islander033 06-15-2019 07:14 AM

Thanks again T!

he was just at the track yesterday, left lane. Looks like he lost some trap speed with a better 60ft...

https://cimg9.ibsrv.net/gimg/ls1tech...bb573d471.jpeg

2010CamaroS 06-15-2019 02:24 PM

Good run DD! Your still up by a good margin on racing vettes lol

islander033 06-15-2019 09:23 PM


Originally Posted by 2010CamaroS (Post 20110311)
Good run DD! Your still up by a good margin on racing vettes lol

Thanks mang. Still can’t say that I've lost to one on a clean hit.


All times are GMT -5. The time now is 12:46 AM.


© 2024 MH Sub I, LLC dba Internet Brands