Ws6 vs c6z Can this build including a built strange rear with 3.73s and 100shot Beat a H/C c6z from a roll or even a dig? https://cimg3.ibsrv.net/gimg/ls1tech...d4654df3c3.png beat a h/c c6z? |
No..... |
Try a dig, not a roll, in my opinion. |
C6Z is for real. Even a LS3 C6 with bolt ons is a tough out. |
Reason I ask is because I had a h/c/I c6z and ran a 10.6 and the t/a ran a 10.9 all motor on race fuel. Figured with 100shot should be close 😨 |
Originally Posted by torqls1
(Post 20333237)
Reason I ask is because I had a h/c/I c6z and ran a 10.6 and the t/a ran a 10.9 all motor on race fuel. Figured with 100shot should be close 😨 |
A h/c c6z can be formidable if done right. Problem is most don't do them right .....well....because most don't have a fucking clue. 10.6 for a h/c c6z is shit. 10.6 for a bolt on c6z is shit. As a comparison lazerlemon and i made his bolt on ls3 c6 run 10.5@132. There were changes that could have been made to make that bolt on combo faster. It was far from maxed out or max effort. |
Originally Posted by HioSSilver
(Post 20334162)
A h/c c6z can be formidable if done right. Problem is most don't do them right .....well....because most don't have a fucking clue. 10.6 for a h/c c6z is shit. 10.6 for a bolt on c6z is shit. As a comparison lazerlemon and i made his bolt on ls3 c6 run 10.5@132. There were changes that could have been made to make that bolt on combo faster. It was far from maxed out or max effort. |
Originally Posted by islander033
(Post 20334389)
Then went slower with H/C ? |
Originally Posted by torqls1
(Post 20333237)
Reason I ask is because I had a h/c/I c6z and ran a 10.6 and the t/a ran a 10.9 all motor on race fuel. Figured with 100shot should be close 😨 |
Originally Posted by torqls1
(Post 20333237)
Reason I ask is because I had a h/c/I c6z and ran a 10.6 and the t/a ran a 10.9 all motor on race fuel. Figured with 100shot should be close 😨 |
Originally Posted by islander033
(Post 20334389)
Then went slower with H/C ? Yup...went slower. Thus proving just because you throw h/c at something doesn't mean it's gonna go faster. Now....since your so inquisitive. Ask me how many h/c or cam only cars outran muh bolt on ls6......lol
Originally Posted by ohioborn80
(Post 20334425)
has he had it back out with the h/c combo? They swore it was going 9s with the h/c combo.
Originally Posted by ohioborn80
(Post 20334426)
I've seen h/c z06 make 550-670whp. All in the complete combo. |
Originally Posted by HioSSilver
(Post 20334556)
Look at bitch boi making a comment to try and poke someone.......but he actually played right into my hand. Yup...went slower. Thus proving just because you throw h/c at something doesn't mean it's gonna go faster. Now....since your so inquisitive. Ask me how many h/c or cam only cars outran muh bolt on ls6......lol None because you don't race? It likely could have with other changes. After all....the motor isn't the only thing going down the track. Doubtful? I've seen them make 540whp with bolts. |
Oh look....fuchsia is the faggs new fave color. Stfu dumbass |
Originally Posted by HioSSilver
(Post 20334828)
Oh look....fuchsia is the faggs new fave color. Stfu dumbass |
That’s some necro action right there |
Originally Posted by S8ER95Z
(Post 20426579)
That’s some necro action right there |
|
So in a OHC engine the cam lobe does the opening of the valves it and it has essentially a 1:1 ratio or even a 1.1:1 ratio depending on set up. Thus is why changing out rocker arms means youre not bolt ons. |
so damn did the OP ever find out for himself??? |
All times are GMT -5. The time now is 11:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands