??S-10 vs. 99Z28??
03-22-2006, 04:26 PM
#1
11 Second Club
Thread Starter
iTrader: (14)
Join Date: Feb 2004
Location: Central Wisconsin
Posts: 871
Likes: 0
Received 0 Likes
on
0 Posts
??S-10 vs. 99Z28?? Well, I haven't posted in here FOREVER, so here goes.
Just kinda curious what u guys think of this race I have coming up in late summer.
Me: 99 Z28, H/C/I w/ most bolt ons. Made 433RWHP and 389 RWTQ on a Mustang Dyno, so looking around 450ish RWHP and 400+ RWTQ on a Dyno Jet. Installing a Strange Dana 60 whenever it is delivered w/ 4.10s. Ran at the track but broke the 10 bolt on 2nd pass, 1st pass was a baby launch and ran 12.2 only at 115. I was at the end of 3rd, just going into 4th at the end of the 1/4 so the gears should help alot.
I will be on a 28 in. tall M/T drag radial.
Contender: late 80's S-10, 409 cubic in. small block, made just over 500 flywheel hp and 550 flywheel torque. 9in. w/ 4.56 and a powerglide tranny. Fully caged and mostly gutted.
He will be on a M/T Sportman Pros in a 31x18.00x15
1st race will take place at the track and then the street.
Just kinda curious what u guys think of this race I have coming up in late summer.
Me: 99 Z28, H/C/I w/ most bolt ons. Made 433RWHP and 389 RWTQ on a Mustang Dyno, so looking around 450ish RWHP and 400+ RWTQ on a Dyno Jet. Installing a Strange Dana 60 whenever it is delivered w/ 4.10s. Ran at the track but broke the 10 bolt on 2nd pass, 1st pass was a baby launch and ran 12.2 only at 115. I was at the end of 3rd, just going into 4th at the end of the 1/4 so the gears should help alot.
I will be on a 28 in. tall M/T drag radial.
Contender: late 80's S-10, 409 cubic in. small block, made just over 500 flywheel hp and 550 flywheel torque. 9in. w/ 4.56 and a powerglide tranny. Fully caged and mostly gutted.
He will be on a M/T Sportman Pros in a 31x18.00x15
1st race will take place at the track and then the street.
03-22-2006, 04:43 PM
#2
On The Tree
Join Date: Sep 2005
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Im going to say you will lose. He will be weighing right at 3000 if not lighter and have the same power as you. His trans and gears with a high stall will put him ahead. I say 1/2 second win on his part.
03-23-2006, 01:15 AM
#7
11 Second Club
Thread Starter
iTrader: (14)
Join Date: Feb 2004
Location: Central Wisconsin
Posts: 871
Likes: 0
Received 0 Likes
on
0 Posts
I feel about the same as u guys on this one. But I forgot to mention the 150-200 shot I will be adding. LOL but seriously, i will be adding a 150 shot on this car. Just won't be using it for this run, or maybe i will.
Trending Topics
03-23-2006, 01:57 AM
#8
Banned
Join Date: Mar 2006
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
If you want to win you will
But its an S10 for crying out loud.
I can just see it now...
Larry:" Hey Mike, where's the 400hp+ monster Z28 you were tellin me about"
Curly: "Yeah mike i want to ride in it!"
Moe:" Ohh I blew it up using NOS racing an S10"
Larry:" Slap. You Idioit! Slap Slap
Curly:"Slap Slap, what were you thinking? Slap "
Moe:"Duhh I wanted to win
"
Hehe just messin with ya man do what ya want
But its an S10 for crying out loud.
I can just see it now...
Larry:" Hey Mike, where's the 400hp+ monster Z28 you were tellin me about"
Curly: "Yeah mike i want to ride in it!"
Moe:" Ohh I blew it up using NOS racing an S10"
Larry:" Slap. You Idioit! Slap Slap
Curly:"Slap Slap, what were you thinking? Slap "
Moe:"Duhh I wanted to win
"Hehe just messin with ya man do what ya want
03-23-2006, 02:30 AM
#9
11 Second Club
Thread Starter
iTrader: (14)
Join Date: Feb 2004
Location: Central Wisconsin
Posts: 871
Likes: 0
Received 0 Likes
on
0 Posts
LOL!!!!!!!!!!! Thats good. No, I always planned on spraying the car. I wanted a mid 11 sec car on motor and a 10 sec car on the spray. Just something I always wanted to do. I have everything else done now, motor is setup somewhat, tranny is rebuilt and beefed, rearend is unbreakable (better be). Now all I need to do is Blow apart the bottom end and rebuild and set it up w/ a iron block 402 and a single TURBO. Someday soon, and the nitrous will only get me there faster!! LOL
03-23-2006, 02:32 AM
#10
11 Second Club
Thread Starter
iTrader: (14)
Join Date: Feb 2004
Location: Central Wisconsin
Posts: 871
Likes: 0
Received 0 Likes
on
0 Posts
As for it being a s-10, it is a frame off restore job and it will look rather nice. I'm the one that is helping restore it. LOL Maybe I should quit helping and he will never be able to get it done, thus I will never lose to him. LOL