Tried to race 4 KB Cobra's with MT ET Street DR's on, and they all pussied out!
#21
Originally Posted by SDB
FINALLY! I figured that comment would get Unit out...
I know there not as bad as Supras, but the Cobra's are too easy to get high Dyno's on and too many of the owners only want to go from a roll!
Let me know when you race Allign...I want to come up and watch/play!
SDB
I know there not as bad as Supras, but the Cobra's are too easy to get high Dyno's on and too many of the owners only want to go from a roll!
Let me know when you race Allign...I want to come up and watch/play!
SDB
#22
On The Tree
iTrader: (1)
Join Date: Aug 2005
Location: nyc
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Wants an LS1
Just remember....they make power like the LS1 strokers...with less then half the displacement. theirs a shot for ya
Then get technical and count the displacment of the blower and thats a total backfire of an arguement. Maybe I just misread what you were trying to say.
Last edited by Car RamRod; 07-09-2006 at 07:08 PM.
#23
On The Tree
iTrader: (7)
Join Date: Feb 2004
Location: Chicago
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Great thread!!! The one thing I must say is whatever side you're on you always think on the other side is a bunch of douches. I'm formerly of the blue oval crowd and I used to think the same about the LS1 crowd.
Although I must say that last time I asked to race a "terminator" he quoted his mod list and estimated rwhp, but didn't want to race, kind of dismissing me. Kind of pocked my *** a little.
Although I must say that last time I asked to race a "terminator" he quoted his mod list and estimated rwhp, but didn't want to race, kind of dismissing me. Kind of pocked my *** a little.
#25
On The Tree
iTrader: (7)
Join Date: Feb 2004
Location: Chicago
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Car RamRod
less than half displacement? How many ls1 strokers are out there that are displacing 562ci or more?
Then get technical and count the displacment of the blower and thats a total backfire of an arguement. Maybe I just misread what you were trying to say.
Then get technical and count the displacment of the blower and thats a total backfire of an arguement. Maybe I just misread what you were trying to say.
#26
Teching In
Join Date: Jan 2006
Location: Cincinnati OH
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
SDB, It must suck having a street car that fast, when's the last time you got a decent race while driving around?
Sparetire, congrats on the T/A when did you get it, and did ya sell the dsm?
Sparetire, congrats on the T/A when did you get it, and did ya sell the dsm?
#28
Administrator
Originally Posted by SDB
UNIT, you in Detroit? I will come up sometime this summer....need to get out of Ft. Wayne, no fast street cars up here, and I know there are pleanty in Detoit area!
I really want to get it to a track, maybe 41 Milan, etc.
SDB
I really want to get it to a track, maybe 41 Milan, etc.
SDB
I'll be sure to have my dyno graph handy.
Milan sounds good to me. Keep in mind that I'll only get in one pass before
getting booted.
#32
how is Milan on Friday test n tune? They sticklers about stuff? I have long ARP rear studs, driveshaft loop, and a fire jacket, but other than that, no other safety stuff....I will be in the 10's on motor (probably just spray 150 shot so maybe mid 10's on spray). I will be using radials, full weight, etc. I need to get a decent track time, and know Milan is pretty decent. If not there, I will probably go to Norwalk.
SDB
SDB
#33
Administrator
Originally Posted by SDB
how is Milan on Friday test n tune? They sticklers about stuff?
The last time I was there I made one pass. I went 11.0 @ 130mph while
standing on the brakes at the 1000' mark in hopes of slowing down enough
to not run a 11.49 or less. Needless to say, they kicked my *** right out.
Originally Posted by SDB
If not there, I will probably go to Norwalk.
I don't trailer the car and I'd hate to break something and be stuck 3 hours
from home.
#36
I called Norwalk, and they said I would be OK on a Friday TNT session without my safety equipment. I think I will go there....about a 3 hour drive for me to, and I don't trailer either. And I hate to get stuck there with a broke 10 bolt as well!!!! Maybe I will trailer it there this time!
SDB
Chicago is a definate possibility, a friend of mine is from there and has a mid 10 second Typhoon...he says I should go there with him sometime as well!
SDB
Chicago is a definate possibility, a friend of mine is from there and has a mid 10 second Typhoon...he says I should go there with him sometime as well!
#37
Originally Posted by Wants an LS1
You know gas inst cheap, wouldnt want to waste it on a bolton/sprayed ls1 now would they lol? im not pickin sides, im jsut saying, those things WILL **** you up if ur not careful, 9 times outta 10 youll get the launch on them if they suck at launching...but sometiems they do it JUST so you can hear that whine come from behind like a banshee coming to get you lol
You really think hes stock, hes from the chitown/midwest area were people race for money not for fun.
Lol 8sec cars are stock were I live, some people just dont get it. You dont post all your mods on this site either because its easy for people to look up and see what you have done/
#38
Administrator
Originally Posted by SDB
And I hate to get stuck there with a broke 10 bolt as well!!!! Maybe I will trailer it there this time!
trailers in a 10 second car. I always laugh at that. There's nothing
funny about breaking **** and being stuck at the track though.
#39
10 Second Club
iTrader: (22)
Join Date: Dec 2003
Location: Macomb Michigan
Posts: 1,182
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by unit213
I'll never race him. He's a cop. I don't care if he's a cool cop or not.
I'm not taking that chance. But...if you come up, I'm game. Win or
lose, I guarantee I'll run you.
I'm not taking that chance. But...if you come up, I'm game. Win or
lose, I guarantee I'll run you.
Besides, I think everyone has been waiting to see your car in action.