Ninja 636???
04-17-2007, 10:52 AM
#1
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Jun 2005
Location: Alvin Tx
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
Ninja 636??? Does anyone have a clue what one of those would run in the 1/4? I ran a couple of them the other night and left them sitting still. The quicker of the two wouldnt go from a stop so we went from a 45 roll which sux when you have 4.11 gears but I walked him bad!
04-17-2007, 11:40 AM
#2
ZX-6R ('01) 6/02 10.93 @ 124.81
ZX-6R ('03) 6/03 10.67 @ 131.0
ZX-6R ('04) 8/04 10.50 @ 130.7
ZX-6R ('05) 4/05 10.38 @ 135.6
ZX-6R ('06) 7/06 10.583 @ 132.84
keep in mind that the rider might be a newb..
ZX-6R ('03) 6/03 10.67 @ 131.0
ZX-6R ('04) 8/04 10.50 @ 130.7
ZX-6R ('05) 4/05 10.38 @ 135.6
ZX-6R ('06) 7/06 10.583 @ 132.84
keep in mind that the rider might be a newb..
04-17-2007, 06:44 PM
#3
On the tree
Join Date: May 2004
Posts: 643
Likes: 0
Received 0 Likes
on
0 Posts
The 03-06 bikes are all about the same in trap speeds. I used to own a 636 before I got my 10r. It trapped consistent 130-135 as did the other local 636's. The ET's though are not going to be anywhere near those times. The fastest local guy here is running 10.7's on his 636.
04-17-2007, 08:38 PM
#4
Board Certified Idiot
Join Date: Oct 2005
Location: EHT ..New JERSEY
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
I have a 05 636.. My Friends Dad as a 99 H/C Vette That puts out 450Hp I Still am able to walk on ByHim.. Its going to take over 500 to pass 1 Depending on what speeds to want to take it up to and start from
