am i lowered? pics and height measurements inside...
10-27-2008, 08:00 AM
#1
TECH Regular
Thread Starter
Join Date: Sep 2008
Location: tampa
Posts: 443
Likes: 0
Received 0 Likes
on
0 Posts
am i lowered? pics and height measurements inside... the front from ground to top of wheel well is about 26 3/4" and the rear is about 27 1/2" to 28" this is with the stock 16" rims and tires.
it looks relatively low to me (maybe lowered an inch, maybe not), but there aren't alot of formulas running around here to compare my car to.
car is a 1996 Firebird Formula NON-1LE.
it looks relatively low to me (maybe lowered an inch, maybe not), but there aren't alot of formulas running around here to compare my car to.
car is a 1996 Firebird Formula NON-1LE.
10-27-2008, 01:04 PM
#3
TECH Regular
Thread Starter
Join Date: Sep 2008
Location: tampa
Posts: 443
Likes: 0
Received 0 Likes
on
0 Posts
springs appear as if they are coated black, showing no rust, but no tags on them. unless they were coated black from the factory.
are there aftermarket non-lowering springs that would be coated?
it doesnt really matter to me if they are lowered, i was just more or less curious.
are there aftermarket non-lowering springs that would be coated?
it doesnt really matter to me if they are lowered, i was just more or less curious.
10-27-2008, 01:06 PM
#4
You aren't.
__________________
www.stranoparts.com --814-849-3450
18 SCCA National Championships in house, many more for our customers prove we know our stuff.Talk is cheap, results matter.
Check out our KONI prices, our Master Cylinder Brace, and new Xtracker Hub/wheel bearing upgrade kits!
www.stranoparts.com --814-849-3450
18 SCCA National Championships in house, many more for our customers prove we know our stuff.Talk is cheap, results matter.
Check out our KONI prices, our Master Cylinder Brace, and new Xtracker Hub/wheel bearing upgrade kits!
